Synergy 2110 - Edition 5 – 23rd October ’00 (3375)
Safety instructions
Use only the approved battery pack supplied. Spare batteries – Item Code: 871996 are available
from BT Shops and the Synergy Helpline 0845 602 1041.
Do not try to use any other power supply except the one provided, otherwise you may permanently damage your Synergy 2110. It may also invalidate the guarantee of this apparatus. To get a replacement Synergy 2110 base station power supply unit – Item Code 872273 – contact the Synergy Helpline 0845 602 1041.
Do not open the handset or base station. This could expose you to high voltages or other risks. Contact the helpline for all repairs.
There is a slight chance your phone could be damaged by an electrical storm. We recommend
that you unplug your Synergy 2110 from the mains power and telephone socket during storms.
The Synergy 2110 will produce a certain amount of heat during operation. Equally, the handset as
well as any additional chargers you purchase can also become warm during charging. We advise against placing these products on antique, veneered or wooden surfaces as damage may occur.
Do not use the Synergy 2110 in damp, humid conditions such as bathrooms. Do not expose the
equipment or batteries to fire and water.
Do not dispose of used batteries with general household rubbish and do not burn them.
Do not use the handsets in places where there are explosive hazards.
If you wear a hearing aid, please note that the Synergy 2110 works by sending radio signals between
the base station and handset. These signals may interfere with some hearing aids, causing a humming noise.
Synergy 2110 can interfere with other electrical equipment, e.g. answering machines, TV and radio sets, clock radio/alarms and computers if placed too close. It is recommended that you place your Synergy 2110 at least one metre away from such appliances to minimise any risk of interference.
Make sure you connect the power and telephone lines to the correct sockets in the base station.
Clean the handset and base station with a damp (not wet) cloth or antistatic wipe. Never use a dry cloth as this may cause a static shock. Never spray cleaning fluid directly onto the telephone.
SAFETY INSTRUCTIONS
7