BT 2110 manual Fitting the belt-clip, Connect the telephone line cord

Page 12

Synergy 2110 - Edition 5 – 23rd October ’00 (3375)

SETTING UP

4Fitting the belt-clip

Attach the belt-clip to the handset.

Connect the telephone line cord

5to the Synergy2110base station

Plug the line cord into the line socket on your Synergy base station.

Please note

Do not connect the telephone line cord to the phone socket until your handset batteries are fully charged. This will prevent the risk of the phone being answered before batteries are charged, which may prevent them from reaching maximum capacity.

6Connect the telephone line cord

If you do not have modern phone sockets, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct type. This is a chargeable service.

Your Synergy is now ready for use.

Pre-set PINs

Your Synergy 2110 comes with a pre-set PIN which you will need to use to perform various functions on your phone.

When you enter your base station PIN, the display will not show it for security reasons.

Base station PIN is 0000 – used when adjusting base station settings and registration of new handsets.

Customer Helpline

If you experience any difficulties in installing your Synergy 2110 please contact the Helpline on 0845 602 1041. The Helpline is open 9am-5.30pm Mon-Fri.

10

Image 12

Contents User Guide Synergy 2110 Edition 5 23rd October ’00 At a glance Int/SecrecyExplanation of the display icons This guide IndexKey features Introduction Building up a phone systemUnpacking your Synergy2110 For your recordsSafety instructions Setting up Connect the power cablePlan the location of your Synergy Install the rechargeable Battery in the handset Charge the handset battery For at least 16 hoursFitting the belt-clip Connect the telephone line cordUsing your Synergy 2110 telephone Making and receiving callsUsing the 10 number memory To adjust the earpiece volumeSecrecy To store a number in the memoryDirect call To enter a pause in a stored number To delete an entryTo dial a number stored in the memory To store a direct call numberTo cancel the direct call number To dial a direct call numberHandset settings To adjust the handset ringer volumeTo switch the keytones off and on To adjust the ringer melodyBase station settings To switch auto answer on or off BT Select Services Caller Display ServiceTo view the Calls List Call Waiting To delete a number from the Calls ListTo use Call Waiting Other services Using additional handsets To register a handsetTo hold a three-way conversation To call another handsetOperating with additional base stations To register your handset with another base stationHelp Emergency callsCheck that Guarantee General informationSwitchboard External Line access code Switchboard compatibilityTechnical information To automatically insert a pauseDialling mode To adjust Recall settingsGo to Tone Index DectPIN Offices worldwide