BT 2110 manual Using additional handsets, To register a handset

Page 23

Synergy 2110 - Edition 5 – 23rd October ’00 (3375)

Using additional handsets

Registering an additional Synergy handset with the base station or de-registering a handset.

As well as your original handset, you can register up to a further 4 additional handsets to your Synergy 2110 base station.

To register a handset

The system allows internal calls between two handsets while a third is making an external call.

Each additional handset you purchase must be registered to the base station.

Please note

Remember to charge the batteries of new handsets for at least 16 hours. When switched on, a new additional handset will display the flashing icon.This tells you that the handset is not yet registered with the base station.

Please note

The following process is only for registering another Synergy 2110 handset to the base station.

If you are registering any other handset, then please refer to that handset’s user guide for instructions.

Page

Options

R

JKL

5

1-4

PIN

Options

R

At the base station: Press and hold the Page button for at least 10 seconds. The green Power/In Use light will flash.

At the handset:

Within the next 30 seconds press the Options button.

Press the 5 button.

Enter the number of the base station you wish to register the handset to (1-4).

For example, if it is the second base station you are registering a handset to you should use 2 and so on.

You will hear a confirmation tone.

Enter your base station PIN. (Original setting = 0000.)

Press the Options button to confirm.

ADDITIONAL HANDSETS

Please note

If the registration process fails, the handset display shows the flashing icon and you should begin the process again.

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents User Guide Synergy 2110 Edition 5 23rd October ’00 Int/Secrecy At a glanceExplanation of the display icons Index This guideKey features Building up a phone system IntroductionFor your records Unpacking your Synergy2110Safety instructions Plan the location of your Synergy Setting upConnect the power cable Charge the handset battery For at least 16 hours Install the rechargeable Battery in the handsetConnect the telephone line cord Fitting the belt-clipMaking and receiving calls Using your Synergy 2110 telephoneTo store a number in the memory Using the 10 number memoryTo adjust the earpiece volume SecrecyTo store a direct call number Direct callTo enter a pause in a stored number To delete an entry To dial a number stored in the memoryTo dial a direct call number To cancel the direct call numberTo adjust the ringer melody Handset settingsTo adjust the handset ringer volume To switch the keytones off and onBase station settings To switch auto answer on or off To view the Calls List BT Select ServicesCaller Display Service To use Call Waiting Call WaitingTo delete a number from the Calls List Other services To register a handset Using additional handsetsTo call another handset To hold a three-way conversationTo register your handset with another base station Operating with additional base stationsEmergency calls HelpCheck that General information GuaranteeTo automatically insert a pause Switchboard External Line access codeSwitchboard compatibility Technical informationGo to Tone Dialling modeTo adjust Recall settings Dect IndexPIN Offices worldwide
Top Page Image Contents