Synergy 2110 - Edition 5 – 23rd October ’00 (3375)
Help
Emergency calls
The emergency services can be contacted in the UK by dialling 999 or 112 which is valid in any country that is a member of the European community.
BT accepts no responsibility for damage caused to your Synergy handset by using any other type of battery.
No display appears
The battery may be flat or dead. Recharge or replace the battery.
The handset may be switched off.
HELP
Please note
If your Synergy 2110 is connected to a switchboard/PBX, you may have to dial an access number before 999 to contact the emergency services. Some switchboards cannot dial out during a power failure.
The Synergy 2110 will not work when the power fails. Alternative arrangements should be made for access to emergency services.
Replacing the handset battery
After a time, you may find that the handset battery is running out of charge more quickly. This is a standard sign of wear and the battery will need replacing.
Spare batteries (Item Code 871996) are available from BT Shops or contact the Synergy 2110 Helpline
0845 602 1041.
Do not immerse batteries in water or throw them into a fire, or dispose of them with ordinary domestic refuse.
No dial tone
Is the telephone line cord plugged into the phone socket?
Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
Is the display flashing 
?
The mains power cable may not be connected at the base or switched on.
Are you in range of the base station?
Battery could be low or flat.
If using more than one base station, check that you are connected to the correct base. See page 23.
No ring on the handset
The ringer volume may be switched to off. To adjust the ringer volume on the handset, see page 15.
Check that the base station is plugged into the phone socket.
Check that the base station is plugged into the mains power and switched on.
24