BT 1250 Classic manual Silent ring, To set the date Ringer melody

Page 13

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

To set the time

Ringer volume

Intercom

C OK

1

ABC

2

1 2 3

4 5 6

7 8 9

C OK

C OK

Press the INTERCOM button.

Press the OK button.

Press the 1 button.

Press the 2 button.

Use the keypad to input the time e.g. 17.35 (24 hour clock).

When entering the time press the C button to correct a mistake and the OK button to save the time when finished.

Press the C button twice to exit.

C	OK	Press the OK button.
A
BC		Press the 2 button.
2		Press the 2 button.

▲Use the UP and DOWN buttons to ▼ select the volume you require.

C OK	Press OK to confirm.

Silent ring

C OK	Press the OK button.

The time will now appear on the handset.

Note

The time is also automatically updated from the information provided by the network during an incoming call with Caller Display.

1Press the 1 button.

▲Use the UP or DOWN button to select ▼ 1 for ringer active or 2 for silent ring.

The display will show the symbol to indicate a silent ring.

C OK	Press OK to confirm.

To set the date

Ringer melody

Intercom

C OK

1

DEF

3

1 2 3

4 5 6

7 8 9

C OK

C OK

Press the INTERCOM button.

Press the OK button.

Press the 1 button.

Press the 3 button.

Use the keypad to input the date DD/MM/YY.

When entering the date press the C button to correct a mistake and the OK button to save the date when finished. The date will be saved but not displayed.

Press the C button twice to exit.

C	OK	Press the OK button.
D		Press the 3 button.
EF
3

▲ Use the UP or DOWN button to select ▼ the melody you require. There are 5

melodies to choose from.

C OK	Press OK to confirm.

Note

Please note that the melody and volume is emitted from the handset only. They are not available from the base.

13

Image 13

Contents BT On-Air 1250 Classic Handset At a glanceBase This guide At a glance Using additional handsets Introduction BasesIntroduction Safety informationUnpacking your BT On-Air 1250 Classic For your recordsConnect the power supply and switch on Setting upPlan the location PlinthFrom any BT Shop or from the Helpline on 0845 601 Charge the handset battery for at least 16 hoursChanging your handset fascias Connect the telephone line cord after charging your handsetCall timer Using the telephoneCall Monitor Making and ending callsSecrecy To switch secrecy on/offRedial To delete all numbers shown in the redial listPaging handsets Number memoryCaller Display Internal callsTransferring calls To make an internal call to another handsetKeypad beeps and volume Handset settingsCalls list To view the Calls listTo set the date Ringer melody Silent ringTo change base station priority Base settingsTo change your System Code System CodeTo set the time and date Please see To record your own outgoing message OGMTo listen to your outgoing message To delete your outgoing messagesFor Answer and record Press the 3 button For Answer onlyTo switch the answering machine on from the handset To adjust the time allowed for recording incoming messagesTo switch the answering machine on from the base Playing your messages Deleting all messages Answering machine operation during message playbackTo record a memo message To play messages from the handsetTo set up and change the VIP access code VIP featureTo set up call screening Press the Intercom button To change the remote access code Remote accessTo access your answering machine from a remote phone Answering machine control functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets At the basePress and hold down General information GuaranteeTechnical information Switchboard external line access code Switchboard compatibilityRecall To activate RecallPress OK to store 122 mm Wall mountingIndex VIP Page To the answering machine functions Quick GuideFunction Switch answering machine on Play messages