BT 1250 Classic manual Secrecy, To delete all numbers shown in the redial list, Redial list

Page 9

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

To adjust the earpiece volume

You can adjust the volume during a call.

Press the UP button to increase the volume.

Press the DOWN button to decrease the volume.

The display shows the current volume level.

Note

The symbol on your handset display indicates when you are in range of the base station. If the symbol disappears you are out of range and will need to move closer to the base station.

Please note that this product does not have

autotalk standby. To end a call you must press the RED PHONE button, you cannot

just replace the handset on the base station.

To delete all numbers shown in the redial list

C OK

Press OK then 4, this will delete all

G

numbers in the redial list.

HI

 

4

 

The display will return to the idle state.

Secrecy

When on a call you can talk to someone in the same room, without your caller hearing.

To switch secrecy on/off

C OK During a call, press the C button. C will now flash to show it is in operation.

C OK

Press the C button again to resume

 

your call.

Redial

Redial list

Redial

Press the REDIAL button. This will

 

 

take you to the most recent number.

Use the UP or DOWN button to scroll to the number you require.

Press the GREEN PHONE button to dial the number.

9

Image 9
Contents BT On-Air 1250 Classic At a glance HandsetBase This guide At a glance Using additional handsets Introduction BasesIntroduction Safety informationUnpacking your BT On-Air 1250 Classic For your recordsConnect the power supply and switch on Setting upPlan the location PlinthFrom any BT Shop or from the Helpline on 0845 601 Charge the handset battery for at least 16 hoursChanging your handset fascias Connect the telephone line cord after charging your handsetCall timer Using the telephoneCall Monitor Making and ending callsSecrecy To switch secrecy on/offRedial To delete all numbers shown in the redial listPaging handsets Number memoryCaller Display Internal callsTransferring calls To make an internal call to another handsetKeypad beeps and volume Handset settingsCalls list To view the Calls listTo set the date Ringer melody Silent ringTo change base station priority Base settingsTo change your System Code System CodeTo set the time and date Please see To record your own outgoing message OGMTo listen to your outgoing message To delete your outgoing messagesFor Answer and record Press the 3 button For Answer onlyTo adjust the time allowed for recording incoming messages To switch the answering machine on from the handsetTo switch the answering machine on from the base Playing your messages Deleting all messages Answering machine operation during message playbackTo record a memo message To play messages from the handsetVIP feature To set up and change the VIP access codeTo set up call screening Press the Intercom button Remote access To change the remote access codeTo access your answering machine from a remote phone Answering machine control functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets At the basePress and hold down Guarantee General informationTechnical information Switchboard external line access code Switchboard compatibilityRecall To activate RecallPress OK to store 122 mm Wall mountingIndex VIP Page To the answering machine functions Quick GuideFunction Switch answering machine on Play messages