BT 1250 Classic manual Press and hold down

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

To register a handset to a base station (if you have changed the System Code from 0000)

To de-register a handset from the base

I ntercom

At the base:–

ip	Press and hold down the		SKIP
Sk

button until the PLAY button starts to flash.

CO K

D	EF
3
D	EF

Press the INTERCOM button.

Press the OK button. F1 will appear on the display.

Press the 3 button then the 3 button again –– –– –– –– will appear on the display.

CO K

WXYZ

9

▲

▼

CO K

CODE

On the handset:–

Press the OK button.

Press the 9 button.

Use the UP or DOWN button to select the base number ie. 1234.

Press the OK button.

Enter the System Code – – – – .

3

CODE

CO K

CO K

Enter the System Code (0000 if not changed). All registered handset numbers are displayed.

Enter the number of the handset to be de-registered. INIT=F6 will appear on the de-registered handset.

Press the C button twice to exit.

Wait until the available handset numbers appear. ie. 456. Then press the handset number that you want.

Note

Note

The number you save becomes the handset’s name (ie. ‘Handset 1’).

When planning to use a handset with more than one base, we recommend that you:

•Give a number to each base (from 1-4).

•Number each handset (from 1-6).

•Register your handset(s) at base 2 (and 3 & 4 if used) using the same internal number as at base 1.

Helpline

If you are experiencing difficulty, please call the BT On-Air Helpline on 0845 601 2476.

25