BT 1250 Classic manual Base settings, To change base station priority, To change your System Code

Page 14

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

Base settings

System Code

Your base station has a default setting of 0000 but you may want to change this.

If you change your System Code keep a record of the new number by writing it in the space provided on page 4.

Base station priority

If you are using more than one base, you can select which base your handset will use.

To change base station priority

C	OK	Press the OK button.
7		Press the 7 button.
PQ	RS
	RS

▲Use the UP and DOWN buttons to ▼ select the base you require.

The flashing digit on the left of the handset is the base number.

Flashing -0- indicates that no base has priority and the handset will therefore register to the first base it finds.

To change your System Code

C OK

Press OK to confirm.

Intercom

Press the INTERCOM button.

C OK Press the OK button. F1 will appear on the display.

DEF

3

1

OLD

CODE

Press the 3 button.

Press the 1 button.

Enter existing code (0000 if not changed). As you enter each digit in turn the dash will stop flashing. When you have entered four digits all four dashes will then start flashing again.

NEW

CODE

CONFIRM

CODE

C OK

Enter your new System Code. As you enter each digit in turn the dash will again stop flashing.

Enter your new System Code again.

Press the C button twice to exit.

C OK

14

Image 14

Contents BT On-Air 1250 Classic Base At a glanceHandset At a glance Using additional handsets Introduction Bases This guideUnpacking your BT On-Air 1250 Classic Safety informationIntroduction For your recordsPlan the location Setting upConnect the power supply and switch on PlinthCharge the handset battery for at least 16 hours From any BT Shop or from the Helpline on 0845 601Connect the telephone line cord after charging your handset Changing your handset fasciasCall Monitor Using the telephoneCall timer Making and ending callsRedial To switch secrecy on/offSecrecy To delete all numbers shown in the redial listNumber memory Paging handsetsTransferring calls Internal callsCaller Display To make an internal call to another handsetCalls list Handset settingsKeypad beeps and volume To view the Calls listSilent ring To set the date Ringer melodyTo change your System Code Base settingsTo change base station priority System CodeTo record your own outgoing message OGM To set the time and date Please seeFor Answer and record Press the 3 button To delete your outgoing messagesTo listen to your outgoing message For Answer onlyTo switch the answering machine on from the base To adjust the time allowed for recording incoming messagesTo switch the answering machine on from the handset Playing your messages To record a memo message Answering machine operation during message playbackDeleting all messages To play messages from the handsetTo set up call screening VIP featureTo set up and change the VIP access code Press the Intercom button To access your answering machine from a remote phone Remote accessTo change the remote access code Answering machine control functions Registering additional handsets Using additional handsets and basesUsing additional handsets and bases At the basePress and hold down Technical information GuaranteeGeneral information Recall Switchboard compatibilitySwitchboard external line access code To activate RecallPress OK to store Wall mounting 122 mmIndex VIP Page Quick Guide To the answering machine functionsFunction Switch answering machine on Play messages