BT 1250 Classic manual To delete your outgoing messages, To listen to your outgoing message

Page 16

On-Air 1250 Classic user guide ~ 1st Edition ~ 7th August ’01 ~ 4073

PQ

RS

7

FOR ANSWER ONLY:

Press the 7 button.

To delete your outgoing messages

T
	UV
8
D	EF
3
D	EF
3
D
EF
3

Press the 8 button.

Press the 3 button twice quickly.

You will hear a beep in the earpiece. Speak your outgoing message.

Press the 3 button to stop recording.

Your outgoing message will be automatically played back through the handset earpiece.

Intercom

PQRS

7

1

DEF

3

Press the INTERCOM button.

Press the 7 button.

Press the 1 button.

Press the 3 button.

All outgoing messages will be

deleted and the answering machine will switch off.

Note

Once you have recorded your outgoing message the answer machine will automatically

be switched on. Remember, if the last message recorded was the Answer only outgoing message then the answer machine will be On but callers will not be able to leave messages.

To listen to your outgoing message

Note

If you have recorded both outgoing messages then they will both be deleted.

To adjust the number of rings before the answering machine switches on

Intercom

Intercom

PQRS

7

DEF

3

Press the INTERCOM button. Press the 7 button.

For Answer and record: Press the 3 button.

C OK

GHI

4

GHI

4

Press the INTERCOM button. Press the OK button.

Press the 4 button twice.

DEF

3

DEF

3

Or

For Answer only:

Press the 3 button twice quickly. Your outgoing message will be played.

▲Use the UP or DOWN button to scroll ▼ to the required number of rings,

between 2 and 5. If 1 (Time Saver) setting is chosen there will be 4 rings if you have no new messages and 2 rings if there are.

C OK	Press OK to confirm.

16

Image 16

Contents BT On-Air 1250 Classic Handset At a glanceBase At a glance Using additional handsets Introduction Bases This guideSafety information IntroductionUnpacking your BT On-Air 1250 Classic For your recordsSetting up Connect the power supply and switch onPlan the location PlinthCharge the handset battery for at least 16 hours From any BT Shop or from the Helpline on 0845 601Connect the telephone line cord after charging your handset Changing your handset fasciasUsing the telephone Call timerCall Monitor Making and ending callsTo switch secrecy on/off SecrecyRedial To delete all numbers shown in the redial listNumber memory Paging handsetsInternal calls Caller DisplayTransferring calls To make an internal call to another handsetHandset settings Keypad beeps and volumeCalls list To view the Calls listSilent ring To set the date Ringer melodyBase settings To change base station priorityTo change your System Code System CodeTo record your own outgoing message OGM To set the time and date Please seeTo delete your outgoing messages To listen to your outgoing messageFor Answer and record Press the 3 button For Answer onlyTo switch the answering machine on from the handset To adjust the time allowed for recording incoming messagesTo switch the answering machine on from the base Playing your messages Answering machine operation during message playback Deleting all messagesTo record a memo message To play messages from the handsetTo set up and change the VIP access code VIP featureTo set up call screening Press the Intercom button To change the remote access code Remote accessTo access your answering machine from a remote phone Answering machine control functions Using additional handsets and bases Using additional handsets and basesRegistering additional handsets At the basePress and hold down General information GuaranteeTechnical information Switchboard compatibility Switchboard external line access codeRecall To activate RecallPress OK to store Wall mounting 122 mmIndex VIP Page Quick Guide To the answering machine functionsFunction Switch answering machine on Play messages