Using the quickdial memory
Shared and personal quickdials
You can store up to 20 numbers on your Synergy 900.
Shared telephone numbers
10 numbers can be stored in your shared memory. These numbers can be quick dialled by any Synergy handset registered with the base station.
Personal telephone numbers
A further 10 numbers can be stored in your personal memory. These numbers can only be used to quickdial from the handset they are stored in.
To select shared or personal quickdial numbers
Your Synergy is set to SHARED quickdials. You can switch between SHARED and PERSONAL quickdials.
Quickdial
•Press and hold the QUICKDIAL button for at least 2 seconds.
•Handset beeps and LCD shows SHARED or PERSONAL depending on the current setting.
•Press ➔ to switch between the 2 options.
•When required option is displayed on LCD press ✔ to confirm.
•Handset LCD reverts to HSET 1
To store a quickdial number
Quickdial
Once you have selected either your ‘Personal’ or ‘Shared’ QUICKDIAL store:
•Press and release the QUICKDIAL button
•LCD shows 1 if no number stored or 1 followed by the number stored in the memory.
•Press the ➔ button to scroll through the memory locations
•When the required memory location is displayed press and hold the QUICKDIAL button for at least 2 seconds or until a beep is heard.
•Enter the phone number you want.
•The display shows the location and the phone number.
•Press the ✔ button to store the number. You hear a confirmation beep and the display shows STORED
You may find it useful to keep a note of the location number
PULL
1
2
3
4
5
6
7
8
9
0
No.
11