BT 900 manual Remove

Page 28

Display briefly shows PLS WAIT then the base station to which your handset is registered, e.g. BASE 1, and finally shows the handset number you have given it, e.g. HSET 1.

You cannot use the same number on more than one handset since this disables the intercom function.

To de-register your handset

•Press the ➔ button several times until the display shows SET UP.

•Press the ✔ button. Display shows HANDSET.

•Press the ✔ button. Display shows LEVEL.

•Press the ➔ button several times until the display shows REG.

•Press the ✔ button. Display shows ADD.

•Press the ➔ button until the display shows

REMOVE.

•Press the ✔ button. Display shows PIN= - - - - .

•Enter the four-digit base station code. (Default 0000. Enter this if the base station code has not been changed.) The - - - - marks disappear one by one.

•Press the ✔ button. Display shows LABEL= X (i.e. your handset number).

•Press the ✔ button. You will hear a beep, the display will show e.g. HSET 2 followed by REG.

•Your handset is now de-registered.

To de-register another handset that is registered to your base station

Follow the steps opposite ‘To de-register your handset’ but instead of entering the label of your own handset, scroll through the options button

➔until the label of the handset you wish to de-register is shown.

•Press the ✔ button to confirm. You hear a confirmation beep.

•The display on the de-registered handset changes to REG. (Or, if it is also registered with another base station, the display shows the handset number for that base station.)

If you are experiencing problems, please call the Synergy Helpline on 0845 650 20 20.

25

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Synergy Digital cordless telephone featuring DectDate of purchase Place of purchase Serial number Menu options I E N D S F a MAt a glance See page 10 This guide Dect Building up a phone system0845 650 20 Install the rechargeable battery in the handset Connect the power cableTo plan the location of the base station Charge the handset battery for at least 16 hours Connect the telephone line cord Using your Synergy Making and receiving callsTo redial the last number Using the quickdial memory You can display the number before dialling SET UP Optional settingsSecurity PIN Melodies Ring VOLThis will reset Unchanged Additional features EmergencyKeypad guard OLD PIN - - . default Call Waiting Using Select ServicesCall Diversion Press the button twice, display shows Three Way Calling Friends and FamilyEditing select service numbers Using additional handsets Remove Making intercom calls While on the external call, press Transfer If the other handset does not answerOperating with additional base Synergy base stations at home and at the office Connecting to a switchboard RecallMaintenance ServiceGeneral If you have to return your SynergyHelp LCD DisplaysNo dial tone Technical information Connection to the BT telephone networkTechnical specification DECT/GAPIndex DectPage Offices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents