BT 900 manual You can display the number before dialling

Page 15

You can scroll through the quickdial numbers and see any available locations. You can then change or add a number.

Press the ✗ button to reverse one step of the instructions. Or press it and hold for 2 seconds to revert quickly to standby.

To View or edit a quickdial memory number

First, confirm that the handset is searching in the correct memory (ie. SHARED or PERSONAL), if it is not, change it by following the steps on page 11.

Quickdial

•Press and release the QUICKDIAL button.

•Display shows the first quickdial location plus the number stored under that location.

•Press the ➔ button several times to move to the stored number that you want to view or edit.

•To edit press the QUICKDIAL button for a few seconds until a beep is heard.

•Press the ✗ button to delete the existing digits from the right. When the memory is empty, key in the new number.

•Press the ✔ button to store the new number. The display shows STORED and the handset beeps.

To dial a quickdial number

This dials from the quickdial memory, SHARED or PERSONAL, which is currently selected.

Quickdial

0-9

•Press the TALK button.

•Press the QUICKDIAL button.

•Press the location 0-9where the quickdial number you want is stored. The number is dialled.

Or

To view then dial a quickdial number

You can display the number before dialling.

Quickdial

•Press the QUICKDIAL button.

•Display shows the first location and the number stored.

•Press the ➔ button to scroll through the quickdial list until you display the number you want.

•Press the TALK button. The number is dialled.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Digital cordless telephone featuring Dect SynergyDate of purchase Place of purchase Serial number I E N D S F a M Menu optionsAt a glance See page 10 This guide Building up a phone system Dect0845 650 20 Connect the power cable Install the rechargeable battery in the handsetTo plan the location of the base station Charge the handset battery for at least 16 hours Connect the telephone line cord Making and receiving calls Using your SynergyTo redial the last number Using the quickdial memory You can display the number before dialling Optional settings SET UPSecurity PIN Ring VOL MelodiesThis will reset Unchanged Emergency Additional featuresKeypad guard OLD PIN - - . default Using Select Services Call WaitingCall Diversion Press the button twice, display shows Friends and Family Three Way CallingEditing select service numbers Using additional handsets Remove Making intercom calls While on the external call, press If the other handset does not answer TransferOperating with additional base Synergy base stations at home and at the office Recall Connecting to a switchboardIf you have to return your Synergy MaintenanceService GeneralLCD Displays HelpNo dial tone Connection to the BT telephone network Technical informationDECT/GAP Technical specificationDect IndexPage Offices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents