BT 900 manual Operating with additional base

Page 32

Operating with additional base

stations It is possible to build your Synergy 900 into a much larger phone system with the addition of up to 3 extra base stations.

You can use up to six handsets on each Synergy 900 base station, and up to four base stations with your handset to build up a comprehensive and easy to use cordless telephone system.

The handset supplied with each base station is already registered as HSET 1.

To register additional handsets to base stations

Use the instructions shown on page 24, but remember to start the sequence by pressing and holding down the blue PAGE button on the base station you want to register a handset with. It sends a unique signal and your handset will automatically accept it as the next base station.

Automatic connection to different base stations

If each base station is connected to a different telephone line, your handset can only make and receive calls from one base station at a time.

NOTE:

If you move out of range of the base station, you will lose the signal along with any current call. Your handset will now search for the next available base station to which it is registered.

To select a specific base station

For instance, if you are in an area where two or more base stations overlap, you can choose the one which is connected to the telephone line you want to use.

1-4

•Press the ➔ button several times until the display shows SET UP.

•Press the ✔ button. Display shows HANDSET.

•Press the ✔ button. Display shows LEVEL.

•Press the ➔ button several times until the display shows BASE.

•Press the ✔ button. Display shows CHANGE.

•Press the ✔ button. Display shows BASE =

(NO.). This is the base station your handset is currently registered with.

•Either press the ➔ button to scroll through and display the available base stations (1-4) or press the number of the base station you want (1-4) on the keypad.

•Press the ✔ button. You hear a confirmation beep. Display shows BASE = (e.g. 1 ) for two

seconds. The icon starts flashing to indicate that the handset is searching for the selected base. When the selected base is

found, the icon is extinguished and the display changes to show HSET (e.g. 1 ). This is your handset number on the new base station.

29

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Synergy Digital cordless telephone featuring DectDate of purchase Place of purchase Serial number Menu options I E N D S F a MAt a glance See page 10 This guide Dect Building up a phone system0845 650 20 To plan the location of the base station Connect the power cableInstall the rechargeable battery in the handset Charge the handset battery for at least 16 hours Connect the telephone line cord Using your Synergy Making and receiving callsTo redial the last number Using the quickdial memory You can display the number before dialling Security PIN Optional settingsSET UP Melodies Ring VOLThis will reset Unchanged Additional features EmergencyKeypad guard OLD PIN - - . default Call Diversion Using Select ServicesCall Waiting Press the button twice, display shows Three Way Calling Friends and FamilyEditing select service numbers Using additional handsets Remove Making intercom calls While on the external call, press Transfer If the other handset does not answerOperating with additional base Synergy base stations at home and at the office Connecting to a switchboard RecallMaintenance ServiceGeneral If you have to return your SynergyHelp LCD DisplaysNo dial tone Technical information Connection to the BT telephone networkTechnical specification DECT/GAPIndex DectPage Offices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents