BT 900 manual Keypad guard

Page 21

Press the button. Display shows the first personal emergency number. To scroll through the numbers press the button until the number you wish to view or edit is displayed.

To edit, press the button.

Press the button which will delete the digits one at a time. Press the button for as many digits as you wish to remove or until the display shows only the memory number and dash. Now enter the new number or leave blank.

Press the button. Displays shows STORED, beeps then switches to EMERGENCY.

Press and hold the button to return to standby. The display shows HSET 1.

Keypad guard

The keypad guard feature is designed to prevent accidental dialling. To ensure that it is possible to dial your selected emergency numbers the Synergy 900 is able to store up to 4 of your personal emergency numbers.

To switch the keypad guard on

0

Press the button then, within two seconds, press the 0 button. Display shows GUARD ON.

When in GUARD mode, users are restricted to four functions:

Preview dialling an emergency service number.

Answer incoming call.

Dial one of up to four numbers which you can store on the handset memory for emergencies. See ‘Storing personal emergency numbers’, page 17.

Switch keypad GUARD off.

Press the button to reverse one step of the instructions. Or press and hold to revert quickly to standby.

To switch the keypad guard off

0

Press the button then, within two seconds, press the 0 button.

If you press any other button while the GUARD is switched on, the display shows PRESS TICK for two seconds. If you press the button, the display shows NOW PRESS 0. You have two seconds to press the 0 button before the display returns to GUARD ON.

NOTE:

If the handset ringer has been switched off , the display will show SILENT instead of GUARD ON.

Dialling emergency numbers when the keypad guard is on

To dial any of the emergency numbers

Enter the number you want in full.

Press the TALK button.

18

Image 21
Contents Digital cordless telephone featuring Dect SynergyDate of purchase Place of purchase Serial number I E N D S F a M Menu optionsAt a glance See page 10 This guide Building up a phone system Dect0845 650 20 Connect the power cable Install the rechargeable battery in the handsetTo plan the location of the base station Charge the handset battery for at least 16 hours Connect the telephone line cord Making and receiving calls Using your SynergyTo redial the last number Using the quickdial memory You can display the number before dialling Optional settings SET UPSecurity PIN Ring VOL MelodiesThis will reset Unchanged Emergency Additional featuresKeypad guard OLD PIN - - . default Using Select Services Call WaitingCall Diversion Press the button twice, display shows Friends and Family Three Way CallingEditing select service numbers Using additional handsets Remove Making intercom calls While on the external call, press If the other handset does not answer TransferOperating with additional base Synergy base stations at home and at the office Recall Connecting to a switchboardService MaintenanceGeneral If you have to return your SynergyLCD Displays HelpNo dial tone Connection to the BT telephone network Technical informationDECT/GAP Technical specificationDect IndexPage Offices in Europe, North America, Japan and Asia Pacific