BT 900 manual Using additional handsets

Page 27

Using additional handsets

Registering an additional Synergy handset with the base station or re-registering a handset

Up to six handsets can be registered and operated from the Synergy 900 base station. The system allows intercom calls between two handsets while a third is making an external call.

Each additional handset you purchase must be registered with the base station.

Before registering a new handset

Remember to charge the batteries for at least 16 hours. When switched on, the handset will display REG . This tells you that the handset is not registered with the base station.

To register a handset

At the base station:

•Press and hold down the blue PAGE button until you hear a beep (after about 10 seconds).

You now have up to 1 minute to register the handset, during which the IN-USElight flashes on the base station.

At the handset:

•Press the ➔ button several times until the display shows SET UP.

•Press the ✔ button. Display shows HANDSET.

•Press the ✔ button. Display shows LEVEL.

•Press the ➔ button several times until the display shows REG.

•Press the ✔ button. Display shows ADD.

•Press the ✔ button. Display shows PLS WAIT then, after a short delay, the Park No. of the base station.

•Press the ✔ button. Display shows PIN ----.

•Enter the four-digit base station code. (Default 0000. Enter this if the base station code has not been changed.) The ----marks disappear one by one.

•Press the ✔ button. You hear a confirmation beep. Display shows LABEL = (which refers to the handset number).

•Press the ✔ button to automatically allocate the next handset number.

•If you are re-registering your only or first handset, enter 1, followed by the ✔ button. You hear a confirmation beep.

Park No. is a unique number given to each individual base station

24

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Digital cordless telephone featuring Dect SynergyDate of purchase Place of purchase Serial number I E N D S F a M Menu optionsAt a glance See page 10 This guide Building up a phone system Dect0845 650 20 Connect the power cable Install the rechargeable battery in the handsetTo plan the location of the base station Charge the handset battery for at least 16 hours Connect the telephone line cord Making and receiving calls Using your SynergyTo redial the last number Using the quickdial memory You can display the number before dialling Optional settings SET UPSecurity PIN Ring VOL MelodiesThis will reset Unchanged Emergency Additional featuresKeypad guard OLD PIN - - . default Using Select Services Call WaitingCall Diversion Press the button twice, display shows Friends and Family Three Way CallingEditing select service numbers Using additional handsets Remove Making intercom calls While on the external call, press If the other handset does not answer TransferOperating with additional base Synergy base stations at home and at the office Recall Connecting to a switchboardIf you have to return your Synergy MaintenanceService GeneralLCD Displays HelpNo dial tone Connection to the BT telephone network Technical informationDECT/GAP Technical specificationDect IndexPage Offices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents