BT 900 manual Making intercom calls

Page 29

Making intercom calls

You can make intercom calls to handsets registered to the same base station.

To call another handset

Intercom

1-6

 

Press the INTERCOM button. Display flashes (INT) and you hear a continuous tone (in the earpiece).

Enter the handset number you want (1-6). Display shows INT CALL and the number of the

handset you are calling.

To end an intercom call

Intercom

Press the INTERCOM button. Or

Replace the handset on the base station or charger.

Making and receiving external calls while on an intercom call

To receive an external call

While on an intercom call:

The other handset rings. If there is no answer after 30 seconds, the call is ended.

To answer an intercom call

The handset rings. Display shows INT CALL (display flashes (INT) ) and the number of the handset calling you.

Intercom

Press the INTERCOM button. Or

Lift the handset off the base station or charger.

You hear the call waiting tone in the earpiece. The base station rings. The calls light flashes.

The display flashes .

Press the TALK button to answer the call. The intercom caller is put on hold and the display flashes (INT) and goes blank.

To end the external call, press the TALK button. You will then be returned to the intercom call.

To make an external call

If you need to make an external call while on an intercom call:

Press the TALK button to put your intercom caller on hold. Display flashes INT and shows (display goes blank).

Dial the external number to make your call.

Press the TALK button to end the external call.

26

Image 29
Contents Digital cordless telephone featuring Dect SynergyDate of purchase Place of purchase Serial number I E N D S F a M Menu optionsAt a glance See page 10 This guide Building up a phone system Dect0845 650 20 To plan the location of the base station Connect the power cableInstall the rechargeable battery in the handset Charge the handset battery for at least 16 hours Connect the telephone line cord Making and receiving calls Using your SynergyTo redial the last number Using the quickdial memory You can display the number before dialling Security PIN Optional settingsSET UP Ring VOL MelodiesThis will reset Unchanged Emergency Additional featuresKeypad guard OLD PIN - - . default Call Diversion Using Select ServicesCall Waiting Press the button twice, display shows Friends and Family Three Way CallingEditing select service numbers Using additional handsets Remove Making intercom calls While on the external call, press If the other handset does not answer TransferOperating with additional base Synergy base stations at home and at the office Recall Connecting to a switchboardService MaintenanceGeneral If you have to return your SynergyLCD Displays HelpNo dial tone Connection to the BT telephone network Technical informationDECT/GAP Technical specificationDect IndexPage Offices in Europe, North America, Japan and Asia Pacific