Cisco Systems SPA302D manual Entering Numbers and Text in Fields

Page 12

Getting Started			1
Understanding Your Cisco SPA302D



		Speaker	The speakerphone is turned on.

		Voicemail	You have new voicemail.

		Recovery Software	When this icon appears in the center of the
		Notification	display screen, it indicates that the handset
			has loaded the recovery software image. This
			event can occur when, for example, the
			software image on the Cisco SPA302D has
			been corrupted.
			If this notification appears, download and
			reinstall the latest software on the handset.
			See Upgrading the Handset Software,
			page 30.

Entering Numbers and Text in Fields

Some fields on the Cisco SPA302D require you to enter numbers and text by using the keypad. In general, the following guidelines apply:

•Use the keypad to enter numbers and characters, pressing the key multiple times to select the correct number or letter.

•Press the number key multiple times to move to a different letter under that number. (For example, to enter “Mary,” you would press 6 five times rapidly and then pause (for M); press 2 and then pause (for a), press 7 three times rapidly (for r), and then press 9 three times rapidly (for y).

•Press the Right softkey (Delete) to backspace and delete the last character, or cancel data entry.

•Press the Left softkey to save entered data.

•Press the arrow buttons on the keypad to move between fields.

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

8

Image 12

Contents User Guide Contents Getting Started Using Your Cisco SPA302DContents Appendix a Where to Go From HereCisco Systems, Inc. All rights reserved OL-25472-01 Getting Started OverviewUnderstanding Your Cisco SPA302D Getting Started Cisco SPA302D Display Screen Options When the Handset is Idle Options When There is an Active CallTurning the Handset On and Off Navigating through the Phone Menus Icon Name DescriptionDisplay Screen Icons Three-Way Conference Call,Entering Numbers and Text in Fields Installing the Cisco SPA302D Key Character SetCharging the Handset Select Handset Registration Select Register Deregistering the Handset Select Handset Registration Select DeregisterLocating Handsets Using Your Cisco SPA302D Adjusting Handset Volume and Muting Placing a CallUsing Call Waiting Answering or Ignoring a CallPutting a Call on Hold Ending a CallTransferring a Call Redialing a CallRedial Placing a Three-Way Conference Call Picking Up a CallParking a Call Managing Missed Calls Using the Intercom Feature Viewing the Call HistoryUsing Contacts Configuring Call Settings Accessing the Call Settings MenuConfiguring Do Not Disturb, Call Waiting, and Call Blocking Configuring and Using Speed Dials Creating Speed DialsConfiguring Call Forwarding Select Speed DialChoosing the Default Outgoing Line Select Outgoing Default LineConfiguring Phone Settings Viewing the Line StatusConfiguring Network Settings From the Settings menu, choose Network SettingsSIP Settings Changing Your RingtoneConfiguring Keypad and Call Park Tones Configuring the Backlight Timeout SettingConfiguring the Date and Time From the Settings menu, choose Backlight SettingsChanging Handset Settings From the Settings menu, choose Handset SettingsUpgrading the Handset Software Performing a Factory Reset Viewing Phone InformationAdvanced Handset Configuration Options Troubleshooting the Cisco SPA302D No Network MessageUnresponsive Handset Support Downloads and DocumentationCisco Small Business