Cisco Systems SPA302D manual Configuring Phone Settings, Viewing the Line Status

Page 30

Using Your Cisco SPA302D	2
Using Your Cisco SPA302D
Configuring Phone Settings

NOTE You can choose the outgoing line on a per-call basis by pressing and holding the Start Call button. A list of lines that can be selected for an outgoing call appears.

Viewing the Line Status

You can view the status of all DECT Lines and the PSTN line by doing the following:

STEP 1 Press the center Select button to view the available preferences.

STEP 2 Scroll to Call Settings and press the center Select button again.

STEP 3 Select Line Status. The lines and status are displayed:

•Not Ready—The SIP line is not registered.

•Ready—The SIP line is registered.

•In Use—The SIP line is in on a call.

•Busy—The maximum number of calls in use for a SIP line has been reached.

Configuring Phone Settings

To reach the Settings menu, press the center Select button, scroll to Settings, and press the Select button again.

In the Settings menu, press the arrow buttons to select the settings you want to change and press the Select button. You can perform the following tasks or configure the following options from the Settings menu:

•Handset Registration—See“Registering the Handset to the Cisco SPA232D Mobility Enhanced ATA” section on page11.

•Network Settings

•SIP Settings

•Ringtones

•Tones

•Backlight Settings

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

26

Image 30

Contents User Guide Contents Getting Started Using Your Cisco SPA302DContents Appendix a Where to Go From HereCisco Systems, Inc. All rights reserved OL-25472-01 Getting Started OverviewUnderstanding Your Cisco SPA302D Getting Started Cisco SPA302D Display Screen Options When the Handset is Idle Options When There is an Active CallTurning the Handset On and Off Navigating through the Phone Menus Icon Name DescriptionDisplay Screen Icons Three-Way Conference Call,Entering Numbers and Text in Fields Installing the Cisco SPA302D Key Character SetCharging the Handset Select Handset Registration Select Register Deregistering the Handset Select Handset Registration Select DeregisterLocating Handsets Using Your Cisco SPA302D Adjusting Handset Volume and Muting Placing a CallPutting a Call on Hold Using Call WaitingAnswering or Ignoring a Call Ending a CallTransferring a Call Redialing a CallRedial Placing a Three-Way Conference Call Picking Up a CallParking a Call Managing Missed Calls Using the Intercom Feature Viewing the Call HistoryUsing Contacts Configuring Call Settings Accessing the Call Settings MenuConfiguring Do Not Disturb, Call Waiting, and Call Blocking Configuring and Using Speed Dials Creating Speed DialsConfiguring Call Forwarding Select Speed DialChoosing the Default Outgoing Line Select Outgoing Default LineConfiguring Phone Settings Viewing the Line StatusConfiguring Network Settings From the Settings menu, choose Network SettingsSIP Settings Changing Your RingtoneConfiguring the Date and Time Configuring Keypad and Call Park TonesConfiguring the Backlight Timeout Setting From the Settings menu, choose Backlight SettingsChanging Handset Settings From the Settings menu, choose Handset SettingsUpgrading the Handset Software Performing a Factory Reset Viewing Phone InformationAdvanced Handset Configuration Options Troubleshooting the Cisco SPA302D No Network MessageUnresponsive Handset Support Downloads and DocumentationCisco Small Business