Cisco Systems Essential Setup and Upgrade Guide for Your Cisco SPA302D Cordless Telephone

Page 35

Using Your Cisco SPA302D	2
Using Your Cisco SPA302D
Configuring Phone Settings

STEP 4 Place the handset in the charging cradle.

!

CAUTION Do not remove the handset from the charging cradle during the upgrade. Do not power off the handset, charging cradle, or base station, or otherwise interrupt the upgrade process.

STEP 5 The handset erases the flash memory, downloads the new software, and verifies the upgrade data. After the upgrade, a message appears indicating the status of the upgrade (for example, if the upgrade succeeded). Press Reset to reboot the handset.

NOTE If the upgrade fails, press Reset to reboot the handset. Check the status lights on the Cisco SPA232D to make sure the unit is powered on and functioning. Repeat the upgrade. If the upgrade continues to fail, contact your phone system administrator.

Performing a Factory Reset

NOTE Do not perform a factory reset unless advised to do so by your phone system administrator or by technical support.

Performing a factory reset removes all of the information from your handset (for example, contacts, speed dials, and call records) and restores it to the original factory software state. The Cisco SPA302D remains registered to the Cisco SPA232D after a factory reset, and must be manually deregistered.

To perform a factory reset:

STEP 1 From the Settings menu, choose Factory Reset.

STEP 2 When prompted to confirm the reset, press Confirm. The handset returns to the main display screen after the reset.

Viewing Phone Information

To view information about your handset, including the software version, hardware version, and serial number:

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

31

Image 35

Contents User Guide Using Your Cisco SPA302D Contents Getting StartedAppendix a Where to Go From Here ContentsCisco Systems, Inc. All rights reserved OL-25472-01 Overview Getting StartedUnderstanding Your Cisco SPA302D Getting Started Cisco SPA302D Display Screen Turning the Handset On and Off Options When the Handset is IdleOptions When There is an Active Call Icon Name Description Navigating through the Phone MenusThree-Way Conference Call, Display Screen IconsEntering Numbers and Text in Fields Key Character Set Installing the Cisco SPA302DCharging the Handset Select Handset Registration Select Register Select Handset Registration Select Deregister Deregistering the HandsetLocating Handsets Using Your Cisco SPA302D Placing a Call Adjusting Handset Volume and MutingEnding a Call Using Call WaitingAnswering or Ignoring a Call Putting a Call on HoldRedial Transferring a CallRedialing a Call Parking a Call Placing a Three-Way Conference CallPicking Up a Call Managing Missed Calls Viewing the Call History Using the Intercom FeatureUsing Contacts Configuring Do Not Disturb, Call Waiting, and Call Blocking Configuring Call SettingsAccessing the Call Settings Menu Creating Speed Dials Configuring and Using Speed DialsSelect Speed Dial Configuring Call ForwardingSelect Outgoing Default Line Choosing the Default Outgoing LineViewing the Line Status Configuring Phone SettingsFrom the Settings menu, choose Network Settings Configuring Network SettingsChanging Your Ringtone SIP SettingsFrom the Settings menu, choose Backlight Settings Configuring Keypad and Call Park TonesConfiguring the Backlight Timeout Setting Configuring the Date and TimeUpgrading the Handset Software Changing Handset SettingsFrom the Settings menu, choose Handset Settings Viewing Phone Information Performing a Factory ResetAdvanced Handset Configuration Options Unresponsive Handset Troubleshooting the Cisco SPA302DNo Network Message Cisco Small Business SupportDownloads and Documentation