2. Basic operations
2-7. Preset memory
Up to 10 panel settings can be stored in this memory (flash memory).
The table below lists the settings which are stored.
<Table of stored preset memory>
Item | Description of setting |
| Initial value (factory default) |
Crosspoint | A bus | 1 |
|
| B bus | 2 |
|
| 4 |
| |
| 5 |
| |
| AUX bus | 1 |
|
| Color background | WHITE | |
Wipe | Wipe pattern | 4 | (center) |
| Border width | 4 | (TBD) |
| Soft effect width | 4 | (TBD) |
| Border color | YLW | |
Transition area | BKGD/KEY selection | BKGD | |
| MIX/WIPE selection | MIX | |
| Auto transition time (BKGD) | 60F | |
| Auto transition time (KEY) | 60F | |
Key | Key type (TYPE) | LIN | |
| Key adjustment (ADJ) | GAIN: 100 (TBD) | |
|
| CLIP: 50 (TBD) | |
|
| DENS: 100 (TBD) | |
| Inversion ON/OFF | OFF | |
| Fill color | GRN (TBD) | |
| Edge color | YLW (TBD) | |
| Edge ON/OFF (TYPE) | OFF | |
| Edge width | 4 | (TBD) |
User color | User color 1 (HUE, SAT, LUM) | 0, 0, 100 (TBD) | |
| User color 2 (HUE, SAT, LUM) | 355, 100, 7 (TBD) | |
| User color 3 (HUE, SAT, LUM) | 50, 100, 29 (TBD) | |
| User color 4 (HUE, SAT, LUM) | 0, 0, 0 (TBD) | |
STORE: This is used to store the panel settings in the preset memory.
Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu. The PSMEM (1/3) menu appears first.
Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO. item.
Press the [F4] switch (EXEC) to store the settings.
ＰＳＭＥＭ １／３
ＭＯＤＥ
ＳＴＯＲ
ＲＥＣＬ
ＣＬＲ
ＮＯ．
＊１０
１－１０
ＥＸＥＣ
An asterisk ( 
) appears at the left of the number when data has been saved in the preset memory.
24
