Cisco Systems SPA302D manual SIP Settings, Changing Your Ringtone

Page 32

Using Your Cisco SPA302D

2

 

Configuring Phone Settings

 

 

 

 

 

SIP Settings

You can enter or modify the settings for your Session Initiation Protocol (SIP) connection, which is the Voice over IP (VoIP) connection to the Internet.

NOTE You should only change this setting if advised to do so by your phone system administrator. Only DECT Line 1 is configurable from the Cisco SPA302D handset. Additional DECT Lines for VoIP are configurable by an administrator on the Cisco SPA232D.

STEP 1 From the Settings menu, choose SIP Setting.

STEP 2 Enter the PIN code (available from your phone system administrator). By default, there is no PIN code. Press Confirm.

STEP 3 Press the Up and Down Arrow buttons on the navigation keypad to scroll through the following fields:

Display Name—Identifier of DECT Line 1.

User Name—SIP User Name of VoIP account.

Password—SIP password of VoIP account.

Proxy—The SIP proxy IP address of the VoIP service provider.

Authen ID—An ID used by some VoIP service providers to authenticate login information. Your phone system administrator can provide this information if necessary.

STEP 4 Press Confirm to save your settings.

Changing Your Ringtone

To change your handset ringtone:

STEP 1 From the Settings menu, choose Ringtones.

STEP 2 Press the Up and Down Arrow buttons to select a ringtone. The ringtone plays.

STEP 3 Press Save to save the selected ringtone as the ringtone for your handset.

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

28

Image 32
Contents User Guide Contents Getting Started Using Your Cisco SPA302DContents Appendix a Where to Go From HereCisco Systems, Inc. All rights reserved OL-25472-01 Getting Started OverviewUnderstanding Your Cisco SPA302D Getting Started Cisco SPA302D Display Screen Turning the Handset On and Off Options When the Handset is IdleOptions When There is an Active Call Navigating through the Phone Menus Icon Name DescriptionDisplay Screen Icons Three-Way Conference Call,Entering Numbers and Text in Fields Installing the Cisco SPA302D Key Character SetCharging the Handset Select Handset Registration Select Register Deregistering the Handset Select Handset Registration Select DeregisterLocating Handsets Using Your Cisco SPA302D Adjusting Handset Volume and Muting Placing a CallUsing Call Waiting Answering or Ignoring a CallPutting a Call on Hold Ending a CallRedial Transferring a CallRedialing a Call Parking a Call Placing a Three-Way Conference CallPicking Up a Call Managing Missed Calls Using the Intercom Feature Viewing the Call HistoryUsing Contacts Configuring Do Not Disturb, Call Waiting, and Call Blocking Configuring Call SettingsAccessing the Call Settings Menu Configuring and Using Speed Dials Creating Speed DialsConfiguring Call Forwarding Select Speed DialChoosing the Default Outgoing Line Select Outgoing Default LineConfiguring Phone Settings Viewing the Line StatusConfiguring Network Settings From the Settings menu, choose Network SettingsSIP Settings Changing Your RingtoneConfiguring Keypad and Call Park Tones Configuring the Backlight Timeout SettingConfiguring the Date and Time From the Settings menu, choose Backlight SettingsUpgrading the Handset Software Changing Handset SettingsFrom the Settings menu, choose Handset Settings Performing a Factory Reset Viewing Phone InformationAdvanced Handset Configuration Options Unresponsive Handset Troubleshooting the Cisco SPA302DNo Network Message Cisco Small Business SupportDownloads and Documentation