Cisco Systems SPA302D Deregistering the Handset, Select Handset Registration Select Deregister

Page 16

Getting Started	1
Getting Started
Installing the Cisco SPA302D

STEP 7 Enter the PIN code (available from your phone system administrator). By default, there is no PIN code. Press the Left softkey to confirm that you want to register the handset. The “registering” message appears.

To verify that the handset registered to the base station, confirm that the DECT signal strength icon is solid (not flashing) and that the handset ID, such as Handset 1 (or Handset 2), appears near the top right corner of the display screen.

Deregistering the Handset

To remove the association between the Cisco SPA302D handset and the Cisco

SPA232D base station, you must deregister the handset.

STEP 1 On the Cisco SPA302 handset, press the Select button in the center of the 4-way navigation keypad.

STEP 2 Using the navigation arrow buttons, scroll to the Settings icon and press the center Select button to select it.

STEP 3 Select Handset Registration.

STEP 4 Select Deregister.

STEP 5 Enter the PIN code (available from your phone system administrator). By default, there is no PIN code; however, a PIN code may be set by your administrator to prevent inadvertent deregistration of another handset. Press the Left softkey to confirm.

STEP 6 A list of all handsets registered to the Cisco SPA232D appears. Choose your handset from the list and press the center Select button. (Be sure to choose the correct handset.)

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

12

Image 16

Contents User Guide Contents Getting Started Using Your Cisco SPA302DContents Appendix a Where to Go From HereCisco Systems, Inc. All rights reserved OL-25472-01 Getting Started OverviewUnderstanding Your Cisco SPA302D Getting Started Cisco SPA302D Display Screen Options When There is an Active Call Options When the Handset is IdleTurning the Handset On and Off Navigating through the Phone Menus Icon Name DescriptionDisplay Screen Icons Three-Way Conference Call,Entering Numbers and Text in Fields Installing the Cisco SPA302D Key Character SetCharging the Handset Select Handset Registration Select Register Deregistering the Handset Select Handset Registration Select DeregisterLocating Handsets Using Your Cisco SPA302D Adjusting Handset Volume and Muting Placing a CallUsing Call Waiting Answering or Ignoring a CallPutting a Call on Hold Ending a CallRedialing a Call Transferring a CallRedial Picking Up a Call Placing a Three-Way Conference CallParking a Call Managing Missed Calls Using the Intercom Feature Viewing the Call HistoryUsing Contacts Accessing the Call Settings Menu Configuring Call SettingsConfiguring Do Not Disturb, Call Waiting, and Call Blocking Configuring and Using Speed Dials Creating Speed DialsConfiguring Call Forwarding Select Speed DialChoosing the Default Outgoing Line Select Outgoing Default LineConfiguring Phone Settings Viewing the Line StatusConfiguring Network Settings From the Settings menu, choose Network SettingsSIP Settings Changing Your RingtoneConfiguring Keypad and Call Park Tones Configuring the Backlight Timeout SettingConfiguring the Date and Time From the Settings menu, choose Backlight SettingsFrom the Settings menu, choose Handset Settings Changing Handset SettingsUpgrading the Handset Software Performing a Factory Reset Viewing Phone InformationAdvanced Handset Configuration Options No Network Message Troubleshooting the Cisco SPA302DUnresponsive Handset Downloads and Documentation SupportCisco Small Business