Polk Audio 400, 500 manual Surroundbar Channel Mode Options, Surroundbar only in 7CH Mode

While the SurroundBar CHT was designed to reproduce an enveloping surround experience in the 7CH mode, we have given you the option of adding satellite loud- speakers to create even more precise surround effects. Connect additional satellite speakers and set the SurroundBar’s channel mode switch to either LCR

or 5CH. (See optional settings below)

SURROUNDBAR ONLY IN 7CH MODE

No satellites are hooked up. SurroundBar reproduces LCR, Surround Left (SL), Surround Right (SR), Surround Back Left (SBL) and Surround Back Right (SBR) channels.

SURROUNDBAR IN LCR MODE

WITH FOUR SATELLITES

SurroundBar reproduces LCR channels. Connect Surround Left (SL), Surround Right (SR), Surround Back Left (SBL) and Surround Back Right (SBR) satellites directly to your receiver with speaker wire. The four unused channels

of the SurroundBar 400 CHT cable should be “tied off” with wire nuts (not required for the SurroundBar 500 CHT).

SURROUNDBAR IN 5CH MODE

WITH TWO SATELLITES

SurroundBar reproduces LCR, Surround Left (SL) and Surround Right (SR) channels. Connect Surround Back Left (SBL) and Surround Back Right (SBR) satellites directly to your receiver with speaker wire. The two unused channels of the SurroundBar 400 CHT cable should be “tied off” with wire nuts (not required

for the SurroundBar 500 CHT).