Motorola MD490 manual Monitoring a Room

Page 55

Monitoring a Room

Room monitoring allows you to place a handset in a room and listen to the sounds in that room from another handset.

Action

1Place a handset in the room to be monitored.

2On that handset, press MENU (a).

3Scroll to Monitor Room and press SELECT (a). The display shows Ready to monitor room.

4On the handset you want to listen from, press Intercom. The display lists the handsets registered to the base station.

Note: If you have only 1 handset, pressing the Intercom button automatically pages the other handset.

5Scroll to the handset you set up monitoring on and press PAGE (a).

The handset that was set up for monitoring automatically answers the page. The microphone on that handset is turned on, and the speaker is turned off. The handset you are monitoring from shows Monitoring (handset name).

You can also use the base station for monitoring by following the instructions above from the base station.

To turn off monitoring, press CANCEL (a) or OFF on either handset.

Note: If you answer an incoming call, monitoring is turned off.

Advanced Features

53

Image 55

Contents User’s Guide Page USA TTY Text Telephone On the Web WelcomeNotification of the Local Telephone Company FCC and Interference InformationAfford you the opportunity to correct the situation Rights of the Telephone CompanyThis device may not cause harmful interference Interference InformationHearing Aid Compatibility Important Safety Instructions Installation Guidelines Battery Safety Instructions Contents Adjusting the Volume During a Call Motorola Limited Warranty Place the Base Station Getting StartedPowering the Base Station and Phone Line Connection Wall Mounting the Base Station Getting Started Expansion Handset Controls Base Station ControlsUsing the Navigation Key Using the Soft KeysBase Station Display Using the DisplaysExpansion Handset Display Installing Batteries in the Handsets Setting Up Your Phone and Expansion HandsetsRegistering an Expansion Handset Charging the Expansion HandsetsPersonalizing Your Phone System Setting the Ring Tone and Ring VolumeNaming the Base Station or an Expansion Handset Press Menu a Storing Area Codes for Caller ID Entering TextPress Menu a Scroll to Loc area code and press Setting the Date and Time Setting Touch Tone or Pulse Dialing Setting the Display LanguageMaking a Call Using the Speakerphone on the Base Station Making a Call Using the Base StationMaking a Call Using an Expansion Handset Putting a Call on Hold Switching Between the Handset and SpeakerphoneAdjusting the Volume During a Call on the Expansion Handset Muting a CallFinding a Lost or Misplaced Handset Redialing a NumberPrivate Phonebooks Saving a Number in the PhonebookShared Phonebooks Action Editing a Phonebook Entry Calling a Number from PhonebookDeleting a Phonebook Entry Using Caller IDInserting Pauses in a Number Reviewing the List of Caller ID Calls Store a Caller ID Number in the Phonebook Deleting Caller ID Calls Turning the Answering Machine On or Off Setting Up the Answering MachineRecording an Outgoing Message OGM Outgoing Message OGM GreetingChanging the Outgoing Message Erasing the Outgoing Message Setting the Security ID Number Checking Messages from the Base Station Using the Answer MachineSetting the Voice Prompts Canadian models only Recording a MemoChecking Messages from an Expansion Handset Checking Messages Remotely from a Touch- Tone Phone Answering Machine TTY Text Telephone On the Web Advanced FeaturesConference Calling Intercom Setup Using the IntercomPress Intercom Handset to Handset IntercomUnannounced Transfer Transferring a Call from One Handset to AnotherAnnounced Transfer Using the Handset as a Walkie Talkie Monitoring a Room Products and Accessories Motorola Limited Warranty for the United States and CanadaReplaced AccessoriesPurchaser of the product That are Repaired orSoftware Messaging Devices PhonesPagers Two-Way RadiosWhat Other Limitations Are There? Page Page Page Motorola.com 6864110W32-O