Base settings
8.3Dial Mode
There are 2 types of dialling mode:
•DTMF/Tone dialling (most common used)
•Pulse dialling (for older installations)
To change the dialling mode:
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “Dialling mode”.
5 Select “Tone” or “Pulse”. 6 Return to standby.
8.4Recall (Flash)
Press the Flash key “R” (Key 8 - Picture 2E) to use certain services on your external line such as “call waiting” (if your phone company offers this feature); or to transfer calls if you use a telephone exchange (PABX). The Flash key “R” is a brief interruption of the line. You can set the flash time to 100ms or 250ms.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “Recall Mode”.
5 Select “Recall 1” for short flash time (100ms) or “Recall 2” for long flash time (250ms).
6 Return to standby.
8.5System PIN
The System PIN is used for registering and deregistering handsets and some other optional settings. The default System PIN is 0000.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “System PIN”.
5 Enter the old PIN (0000 by default) and select “OK”.
6 Enter the new PIN, select “OK” and repeat this. 7 Return to standby.
English
23