Cocoon 300
All handsets subscribed with the base unit will sound a signal so you can locate the misplaced
handset. To stop the signal, briefly press the Line key 
on the handset.
4.14 Using the alphanumeric keypad
Use the alphanumeric keypad to type text. To select a letter, press the corresponding key. E.g. if you press the alphanumeric key ’5’, the first character (j) appears on the display. Press it repeatedly to select other characters from this key.
Press the ‘2’ key twice to select the letter ‘B’. If you would like to select both ‘A’ and ‘B’ after each other, first press the ‘2’ key once to select ‘A’, wait 2 seconds until the cursor moves to the next position and then press the ‘2’ key twice to select ‘B’. You can delete characters mistakenly typed by using the Delete key 
. The character in front of the cursor will be deleted. You can
move the cursor by pressing the Up and Down keys 
.
Available characters
Press the right keys to get the following characters:
Keys | First | Second | Third | Fourth | Fifth |
| press | press | press | press | press |
|
|
|
|
|
|
1 | + | - | / | 1 |
|
2 | A | B | C | 2 |
|
3 | D | E | F | 3 |
|
4 | G | H | I | 4 |
|
5 | J | K | L | 5 |
|
6 | M | N | O | 6 |
|
7 | P | Q | R | S | 7 |
8 | T | U | V | 8 |
|
9 | W | X | Y | Z | 9 |
0 | SPACE | 0 |
|
|
|
|
|
|
|
|
|
4.15The Phone Book
4.15.1Adding a number and a name to the Phone Book
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘PHONE BOOK’ appears on the display.
•Press the Programming key 
.
•‘SEARCH‘ appears on the display.
•Press the Up or Down key 
repeatedly until ‘ADD NEW’ appears on the display.
•Press the Programming key 
.
•‘NAME‘ appears on the display.
•Enter the name. Use the alphanumeric keys.
•Press the Programming key 
.
•Enter the telephone number. Use the alphanumeric keys.
•Press the Programming key 
.
•You will hear a long beep. The name and the number are stored in the Phone Book.
61