Cocoon 300
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘BARRING’ appears on the display.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter your PIN code
•Press the Programming key 
.
•‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.
•Press the Up or Down key 
to select one of the 5 memories.
•Enter the number (max. 5 digits) to be barred, e.g. 01486.
•Press the Programming key 
.
•‘HS _ _ _ _ _’ (= number on the handset
•Enter the numbers of the handsets from which the barred numbers cannot be called.
•e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486 These handsets can no longer dial numbers beginning with ‘01486’.
•Press the Programming key 
to confirm your selection.
Repeat the same procedure described above if you would like to bar other numbers (max. 5)!
4.29 Default settings (reset) of the parameters
You can reset the standard (default) settings in the telephone so that they are the same they were when you bought the telephone. You need the PIN code to do this.
The default settings are: |
|
Keypad: | not locked |
Key clicks: | active |
Speaker volume: | level 3 |
Ringer melody: | 1 |
Ringer volume : | 5 |
Selection base unit: | automatic |
To restore the default settings, do the following:
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘SETTING’ appears on the display.
•Press the Programming key 
.
•Press the Up or Down key 
repeatedly until ‘RESET’ appears on the display.
•Press the Programming key 
.
•‘PIN’ appears on the display.
•Enter your PIN code.
•Press the Programming key 
.
4.30 Complete Reinitialisation of the telephone
This function allows you to completely reinitialise the telephone without requiring your PIN code. This will delete all Phone Book memory entries, all handsets will be removed, all default settings will be restored and the default PIN code will be restored to ‘0000’.
69