Telular SX4D user manual Installation Summary, Otherwise, continue to Step, AC Power

Installation Summary

The following steps summarize the installation of the Phonecell SX4D. These steps are explained in detail in the remainder of this

manual.

Step 1. Antenna Setup (page 11)

•Connect the antenna. Finger-tighten the antenna; do not overtighten.

WARNING!

!DO NOT power unit until antenna is connected, as it may burn out the radio transmitter.

Step 2. Connect the Phonecell SX4D to AC Power (page 12)

•Connect the DC barrel connector of the power supply to the rear panel receptacle of the Phonecell SX4D.

•Then, connect the wall 6 VDC power supply to AC power.

NOTE: If your Phonecell SX4D did not come with a pre-installed mini-SIM (Subscriber Identity Module) card, you need to perform the SIM Card Installation and Setup procedure in Step 3. Then, return to this Step 2.

Step 3. SIM Card Installation & Setup (pages 13 - 15)

•If your Phonecell did not come with a pre-installed mini-SIM card, you need to perform the SIM Card Installation and SIM PIN Setup.

•Otherwise, continue to Step 4.

Step 4. Determine Phonecell SX4D Location (page 16)

•Determine the desired location for the Phonecell SX4D.

Step 5. Optional Wall-Mount Installation (page 17)

•The Phonecell SX4D may be mounted on a wall. After you have selected a location and made the necessary connections, your Phonecell SX4D is ready for wall-mounting.

AC Power

SX4D GSM 900 • SX4D GSM 1800 10 USER MANUAL