Telular SX4D user manual SIM Card Installation and Setup, How to Install the Mini-SIM Card

Step 3. SIM Card Installation and Setup

IMPORTANT!

If your Phonecell SX4D did NOT come with a pre-installed mini-SIM (Subscriber Identity Module) card, OR if you’re experiencing SIM card-related problems, fol- low the steps below. Otherwise, continue with STEP 5.

How to Install the Mini-SIM Card

The GSM module within the Phonecell SX4D requires a Subscriber Identification Module (SIM) for normal operation. The service provider sup- plies a SIM card, which carries the account information needed to operate the Phonecell. The mini-SIM compart- ment is on the back of the Phonecell - see Figure 5.

NOTE: If your mini-SIM card is already installed, skip to the SIM PIN Programming section on page 14.

If you don’t have a mini-SIM card, contact your network service provider.

1)Remove the 6 VDC power supply.

2)Remove the SIM compartment cover by removing the screw - see Figure 6.

3)Open the SIM compartment holder.

4)Line up the mini-SIM card with the arrow on the SIM card holder.

5)Gently insert the mini-SIM card in the slot of the SIM card holder- see

Figure 6.

6)Close the SIM card holder.

NOTE: If you insert the SIM card improperly, the holder will not close. Do not force the holder shut. Make sure the SIM card is aligned properly with the directional arrow on the holder.

7)Reattach the SIM compartment cover with the screw.

8)Attach the 6 VDC power supply.

9)Proceed with SIM PIN Programming.

Figure 5 – Mini-SIM Compartment.

Mini-SIM Card Holder

Mini-SIM Card

SIM Compartment Cover

Figure 6 – Mini-SIM Card Installation.

SX4D GSM 900 • SX4D GSM 1800 13 USER MANUAL