Motorola XTNi Series Hands Free without Accessories iVOX, Battery Save, Reset To Factory Defaults

GETTING STARTED

Hands Free without Accessories (iVOX)

•Enable iVOX by pressing the PTT button while

turning the radio ON and the will blink.

•iVOX operation can be temporarily disabled by pressing the PTT button.

•A short press of PTT will re-enable iVOX.

Note:

•The iVOX feature is available only on display models RDU2080d, RDV2080d.

•To learn how to set VOX/iVOX sensitivity levels please refer ahead to "Menu Options" in this same section.

•There is a short delay between when you start talking and when the radio transmits.To learn how to set VOX/iVOX sensitivity levels, please refer to " “MENU Options” on page 33".

•Note: The iVOX feature is available only on display models XTNiD.

Battery Save

Battery Save feature extends the battery life as your radio goes into "idle" state each time there is no radio activity. To enable/disable, press SB1 and SB2 buttons simultaneously for 2 or 3 seconds while powering up the radio until you hear a quick series of beeps. To have a slightly better attack time, set “Battery Save” feature to OFF so that the radio is always ready to transmit or receive without any delays.

Note: Battery Save feature is set to ON by default

Reset To Factory Defaults

Reset to Factory Defaults will set back all radio features to the original factory default settings. To do so, press PTT, SB2 and SB1 simultaneously while turning ON the radio until you hear a high tone chirp beep.

English 32