and lower case, press the A button. Note that the supported lower case characters are: b, c, d, g, h, i, l, o, r, u.
•Pressing the C button will allow you to insert special characters and numbers in the following order: 0 - 9 * {}? &%. + / - _ ' ' \. Character ' ' is a space character.
Long press the PTT button to save and go back to the ‘Channel Aliasing Selection Mode’ to choose other channel to edit the alias name or exit without saving changes by turning OFF the radio.
Note:
•If the channel alias name is left blank, the radio will play a bad key chirp and will stay in the editing menu mode until the channel name is edited and saved.
•When editing the channel alias name, if the radio is left idle after 3 seconds, the radio
will accept the existing character and advance the cursor one space to the right.
NUISANCE CHANNEL DELETE
Nuisance Channel Delete allows you to temporarily remove channels from the "Scan List". This feature is useful when irrelevant conversations on a "nuisance" channel tie up your radio's scanning features. To delete a channel from the scan list:
•Start "Scan Mode" by short pressing the SB2 button (*)
•Wait until the radio stops on the channel you wish to eliminate, then long press the SB2 button to delete it.
•The channel will be removed until you exit "Scan Mode" by pressing the SB2 button again or if radio is turned OFF.
Note: (*)Assumes the SB2 button is not programmed to another function different from the default.
PROGRAMMING FEATURES
47English