Motorola XTNi Series manual Programming Features, Entering Programming Mode

Page 40

PROGRAMMING FEATURES

 

ENTERING PROGRAMMING MODE

 

To enter ‘Programming Mode’, press and hold

 

both the PTT button and the SB1 button

 

simultaneously for three seconds, while turning

 

ON the radio. A unique tone will sound,

 

indicating that the radio has entered

 

’Programming Mode’ and the radio LED will

 

blink a green heartbeat. Once the radio enters

 

the ‘Programming Mode’, which defaults to

 

‘Idle’ Programming Mode, the radio LED will be

 

blinking green heartbeat.

 

Whenever you enter ’Programming Mode’ the

 

PROGRAMMING FEATURES

PROG icon will be displayed and the current

channel aliasing name will be blinking to

 

 

indicate that you can select the channel you

 

want to program. You can scroll up/down to

 

 

38

 

 

English

 

 

 

select the different channels by pressing the

/ buttons.

In ’Programming Mode’ your radio is capable of setting values for each channel by moving between the different programming modes available: Frequencies, CTCSS/DPL codes (Interference Eliminator Code), Scramble, Bandwidth, Maximum Channels, Call Tone, Microphone Gain and Scan.

To move along the different Programming Selection Modes without saving changes, short press the PTT or MENU buttons.

To save changes, long press the PTT button. The radio will return to ’Idle’

Image 40
Contents Page Page Contents Programming Features Getting StartedAccessories ContentsComputer Software Copyrights Computer Software CopyrightsSafety SafetyBatteries and Chargers Safety Information Batteries and Chargers Safety InformationOperational Safety Guidelines Parts of the Radio Radio OverviewRadio Radio Overview Lithium-Ion Li-Ion Battery Side ButtonsModel Frequency Transmit Power Number Antenna Band Battery Features and Charging Options About the Li-Ion BatteryBatteries and Chargers Batteries and ChargersBattery Recycling and Disposal Battery Latchbattery latch Slots Turn OFF the radio Batteries and Chargers Install Remove Power Supply, Adaptors and Drop-in Tray ChargerInstalling Spring Action Belt Clip Battery Life InformationFollowing chart summarizes battery life estimations Charging the Battery Charging with the Drop-in Tray Single Unit ChargerCharging a Stand-Alone Battery Charging a Standard Battery Adjustable bracket Standard High and Ultra High Capacity Charging a High Capacity Battery Drop-in Tray Charger LED Indicators Standard Charger LED IndicatorEstimated Charging Time MUC LED Indicator Adjusting Volume Getting StartedGetting Started Turning Radio ON/OFFTalking and Monitoring Selecting a ChannelReceiving a Call Signal Strength Indicator and Channel Busy Indicators Talk RangeGetting Started Getting Started Radio LED Indicators Radio Status LED IndicationWith Compatible VOX Accessories HANDS-FREE USE/VOXBattery Save Hands Free without Accessories iVOXReset To Factory Defaults Setting VOX/iVOX Sensitivity End of Transmission Tone Roger Beep ToneKeypad Beeps Menu OptionsSetting VOX / iVOX sensitivity IVOGetting StartedImic YES Programming Features Entering Programming ModeProgramming RX Reception Frequencies Programming FeaturesProgramming RX Reception Codes CTCSS/DPL RX BW Programming RX Reception BandwidthProgramming Scramble L Programming Maximum Number of ChannelsMA X CH Programming Call TonesProgramming Microphone Gain Level YES Programming Scan ListProgramming Buttons Editing Channel Alias Name Nuisance Channel Delete CPS Computer Programming Software Time-Out TimerBandwidth Select Call Tones Battery Type SettingScramble Programming Features Cloning Radios Cloning with a Multi-Unit Charger MUCTurn on the Target radio and place it Into one of the SUCs What to do if cloning fails Cloning Radios using the CPS Computer Programming Software Troubleshooting TroubleshootingDoes not come on Cannot activate VOX If the radio is submerged in water USE and CareUSE and Care Frequency and Code Charts Frequency and Code ChartsChannel Radios PMR 446 Defaults Ctcss DPL Codes 108 627 115 712 Warranty Warranty InformationWhat is not Covered by the Warranty Motorola LimitedMotorola Limited Warranty Accessories Chargers Page 6871663M05