Motorola XTNi Series manual Programming Scramble L, Programming Maximum Number of Channels

Page 43

PROGRAMMING SCRAMBLE L

The scramble feature makes your transmissions sound garbled to anyone listening without the same scramble code. It doesn't guarantee confidentiality, but it adds an extra layer of privacy. Scramble default value is OFF.

Once you have entered ’Programming Mode’ and selected the channel in which you want to enable scramble (L), scroll up/down through the programming options by short pressing the PTT button, until your radio reaches the ‘Scramble Programming Mode’:

The current scramble setting will blink. You can select the desired scramble value (0,1,2 or 3)

by pressing the / buttons. Long press the PTT button to exit and save or short press the PTT button to move to the next programming feature without saving.

Note: The values available for scrambling are dependent upon the values programmed via the CPS. When the scramble setting is "0" it means it is disabled.

PROGRAMMING MAXIMUM NUMBER OF CHANNELS

You can configure the maximum number of channels for the radio.

Once you have entered ’Programming Mode’ scroll up/down by short pressing the PTT

PROGRAMMING FEATURES

41English

Image 43
Contents Page Page Contents Getting Started Programming FeaturesContents AccessoriesComputer Software Copyrights Computer Software CopyrightsSafety SafetyBatteries and Chargers Safety Information Batteries and Chargers Safety InformationOperational Safety Guidelines Parts of the Radio Radio OverviewRadio Radio Overview Side Buttons Lithium-Ion Li-Ion BatteryModel Frequency Transmit Power Number Antenna Band Batteries and Chargers Battery Features and Charging OptionsAbout the Li-Ion Battery Batteries and ChargersBattery Recycling and Disposal Battery Latchbattery latch Slots Turn OFF the radio Batteries and Chargers Power Supply, Adaptors and Drop-in Tray Charger Install RemoveBattery Life Information Installing Spring Action Belt ClipFollowing chart summarizes battery life estimations Charging with the Drop-in Tray Single Unit Charger Charging the BatteryCharging a Stand-Alone Battery Charging a Standard Battery Adjustable bracket Standard High and Ultra High Capacity Charging a High Capacity Battery Standard Charger LED Indicator Drop-in Tray Charger LED IndicatorsEstimated Charging Time MUC LED Indicator Turning Radio ON/OFF Adjusting VolumeGetting Started Getting StartedTalking and Monitoring Selecting a ChannelReceiving a Call Talk Range Signal Strength Indicator and Channel Busy IndicatorsGetting Started Radio Status LED Indication Getting Started Radio LED IndicatorsHANDS-FREE USE/VOX With Compatible VOX AccessoriesBattery Save Hands Free without Accessories iVOXReset To Factory Defaults Menu Options Setting VOX/iVOX SensitivityEnd of Transmission Tone Roger Beep Tone Keypad BeepsIVO Setting VOX / iVOX sensitivityStarted GettingImic YES Entering Programming Mode Programming FeaturesProgramming RX Reception Frequencies Programming FeaturesProgramming RX Reception Codes CTCSS/DPL Programming RX Reception Bandwidth RX BWProgramming Maximum Number of Channels Programming Scramble LProgramming Call Tones MA X CHProgramming Microphone Gain Level Programming Scan List YESProgramming Buttons Editing Channel Alias Name Nuisance Channel Delete CPS Computer Programming Software Time-Out TimerBandwidth Select Call Tones Battery Type SettingScramble Cloning with a Multi-Unit Charger MUC Programming Features Cloning RadiosTurn on the Target radio and place it Into one of the SUCs What to do if cloning fails Cloning Radios using the CPS Computer Programming Software Troubleshooting TroubleshootingDoes not come on Cannot activate VOX If the radio is submerged in water USE and CareUSE and Care Frequency and Code Charts Frequency and Code ChartsChannel Radios PMR 446 Defaults Ctcss DPL Codes 108 627 115 712 Motorola Limited WarrantyWarranty Information What is not Covered by the WarrantyMotorola Limited Warranty Accessories Chargers Page 6871663M05