•Due to regional service differences, the caller ID information may not be available for every incoming call. In addition, the callers may intentionally block their name and/or telephone number.
•The time of all handsets is automatically set and updated with incoming caller ID information if you subscribe to this service.
Advanced operation
Call log
•CALL LOG EMPTY will display on screen if there are no call log entries.
The call log can be accessed on the handset by pressing CID, or pressing the center NavKey 
then CALL LOG, then press the center NavKey 
again. If the telephone number of caller ID matches the exact telephone number in the directory, the name of the entry will be shown, otherwise, the name will be shown as delivered by the telephone company.
Review the call log
•When in the call log, use the up or down NavKey 
or 
to scroll through the call log on the handset.
•The name, number, date and time of all incoming calls are displayed on the screen.
•There will be an error tone when the list reaches the top or the end of the call log.
Dial a call log entry
•When in the call log, use the up or down NavKey 
or 
to scroll to the desired entry.
•Press # repeatedly to display the possible dialing options when the telephone number in call log has 7, 8, 10 or 11 digits. For example, if the original number was
CALL LOG EMPTY
>CALL LOG RINGER VOLUME
A.PERSON
3:45 AM | 1/02 |
22 | www.vtechphones.com |