VTech IS6110 user manual 0711 PM, To set the clock manually

Telephone settings

Clock setting

To set the clock manually:

Step 1: Press the MENU softkey from the idle screen.

Step 2: Press the , , and/or NavKeys to choose Settings, then press the SELECT softkey or the center NavKey/SELECT/.

Step 3: Press the up or down NavKey or to choose Clock Setting, then press the SELECT softkey or the center NavKey/SELECT/.

Step 4: Press the up or down NavKey or to choose Manual, then press the SELECT softkey or the center NavKey/SELECT/. The current time will be displayed.

Step 5: Press the up or down NavKey or to adjust the number by increments of 1 while the field is highlighted.

-OR-

Use the keypad (see Chart of characters on page 37) to enter the time directly.

Step 6: Press the left or right NavKey or to move the cursor to the next field.

Step 7: Repeat Steps 5-6until the field of AM/PM is highlighted. Press the up or down NavKey or to choose between AM or PM.

Step 8: While the time is correct, press the SAVE softkey or

the center NavKey/SELECT/ to confirm.

Settings

Clock Setting

Key Tone

IM Alert Tone

Keypad Backlight

Clear Voice Mail

Default Settings

BACK		SELECT
	Settings
	Clock Setting
	Key Tone
	IM Alert Tone
	Keypad Backlight	PC
	Clear Voice Mail
	Default Settings ManualCID
BACK		SELECT

Manual Clock Input

07:11 PM

BACKSAVE

��If you enter an invalid time (e.g. 27:76), the entry will not be saved.

��Only the 12-hour clock format is accepted in the clock setting.

Telephone settings

www.vtechphones.com 50