In Case Of Difficulty
You Hear Noise In The Handset, And None Of The Keys Or Buttons Work
Make sure the power cord is plugged in.
Common Cure For Electronic Equipment
If the unit does not seem to be responding normally, then try putting the Handset in the cradle. If it does not seem to respond, do the following (in the order listed):
1.Disconnect the power to the Base.
2.Disconnect the Handset battery cells.
3.Wait a few minutes.
4.Connect power to the Base.
5.
6.Watch for Handset to display: "VTECH" or your own handset name.
Your Answering System Is Not Recording Messages
•Make sure system is turned on (the ANSWER ON/OFF key is illuminated).
•Make sure Announce Only feature is set to OFF.
You Cannot Hear Recorded Messages
•Using the Base volume control, raise the volume to a comfortable listening level.
CL Is Flashing In The Base Message Window Display:
•You need to set the day and time. Refer to the section(s) on Set The Clock in this User's Manual
Additional Information
34