VTech VT2650 user manual Case Of Difficulty, Phone Doesn’t Work At All, No Dial Tone

Page 33

In Case Of Difficulty

If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech

customer service at 852-2776 3223.

The Phone Doesn’t Work At All

•Make sure the Power Cord is plugged in.

•Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone wall jack.

•Make sure the battery cells are properly charged. If the ‘LOW BATTERY’ message is shown, the the battery cells need charging.

No Dial Tone

•First check all the suggestions above.

•If you still don’t hear a dial tone, disconnect the Base Unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Contact your local telephone company.

You Get Noise, Static, Or A Weak Signal Even When You’re Near The Base Unit

•Household appliances plugged into the same circuit as the Base Unit can sometimes cause interference. Try moving the appliance or the Base Unit to another outlet.

You Get Noise, Static, Or A Weak Signal When You’re Away From The Base Unit

•You may be out of range. Either move closer to the Base, or relocate the Base Unit.

•The layout of your home may be limiting the range. Try moving the Base Unit to another position.

The Handset Does Not Ring When You Receive A Call

•Make sure you have the ringers activated. To set the ringer, see HANDSET SETTINGS.

•Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone jack. Make sure the power cord is plugged in.

•You may be too far from the Base Unit.

•You may have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of the other phones.

You Hear Other Calls While Using Your Phone

•Disconnect your Base Unit from the telephone jack, and plug in a corded telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.

32

Additional Information

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Dual Handset Cordless Phone System Important Safety Instructions Parts Check List Handset Layout Setup Connecting Power to Base Unit/Handset ChargerBase Unit Layout Charging of the Handset Battery Cells Installation and Charge of Battery Cells in HandsetConnecting to Phone Line Check Battery IndicatorChecking for Dial Tone Tone/Pulse SelectionHandset Icons Handset and Base IndicatorsHandset LEDs Base LEDsHandset Operation Mute Function Intercom CallCall Forward and Call Transfer Call Forward Call TransferConference Call Base Operation Operation Phonebook OperationOperation Editing a Phonebook Entry Reviewing/Dialing from the PhonebookDelete a Phonebook Entry Caller ID Call Waiting ID Calls Log Caller ID Call WaitingStoring a Caller ID Deleting Caller ID Dialing from Caller IDRinger Volume Handset SettingsKey Tone preset to on Ringer ToneLanguage preset to English Handset Name preset as ‘VTECH’Dial Type preset to Tone Audible Indicators Turn Answering System On or OffSet The Clock About Mailboxes About AnnouncementsRecord Your Announcement Answering System Feature Setup Review Your AnnouncementDelete Your Announcement Set Security Code Default setting indicated bySet Audible Message Alert OffListen to Messages Adjust Playback Volume Delete Messages Delete a Specific MessageDelete All Old Messages in a Mailbox Call Screening Record a MemoFlashing Counting 1 toSteady for one second 40-99Voice Menu Remote AccessBelt Clip Headset OperationYou Hear Other Calls While Using Your Phone Handset Does Not Ring When You Receive a CallCase Of Difficulty Phone Doesn’t Work At AllCommon Cure For Electronic Equipment Your Answering System Is Not Recording MessagesYou Cannot Hear Recorded Messages Maintenance Technical Specifications Table of Contents Answer System Operation Handset Settings
Top Page Image Contents