ADVANCED OPERATIONS
Dialing from Memory
1.Press the desired LINE key to get a dial tone.
2.Press MEM/PROG. The LCD dis- plays
SPEED DIAL LOCATION _ _.
3.Enter the
Alternate Memory Dialing Method
1.With the Handset OFF, Press MEM/ PROG. The LCD displays SPEED DIAL LOCATION _ _.
2.Enter the
3.Press the desired LINE key. After a 2 second delay to allow for a dial tone, the phone number displayed on the LCD will be generated.
NOTE:
Any digits displayed in the LCD prior to entering Memory Dialing mode will be appended to the front of the con- tents of your selected memory loca- tion. For example, if 1800 was entered (with the Handset OFF), and the phone number in the memory location you selected was 5551212, the number that would be dialed upon pressing a LINE key becomes
CHANGING STORED NUMBERS
To change or replace a number stored in a memory location, simply follow the steps outlined in Programming Phone Numbers into Memory. The new phone number will be stored in any lo- cation you designate. Any phone number previously stored in that loca- tion will be deleted.
DELETING STORED NUMBERS You can delete individual phone num- bers stored in memory, or all stored numbers at one time.
To Delete a single phone number stored in Memory:
With the Handset OFF, press the MEM/ PROG key, and then access the desired memory location by entering the 
) and # ( 
) keys.
Once you have found the desired memory location, press and hold the INT.COM key until the LCD displays:
To delete all phone numbers stored in Memory:
With the Handset OFF, press the MEM/ PROG key, and then access any memory location by entering a
Once a Memory location is displayed in the LCD, press and hold the CONF/ CLEAR key until the LCD changes to
DELETE ALL? DEL TO ALLOW.
To confirm, press INT.COM/DEL. The LCD will display DELETING ALL LOCATIONS.To cancel mass deletion of stored phone numbers, press OFF instead.
26