Tones’ selection by short pressing the PTT
button or 
(Menu) button.
The radio display shows the Programming Call Tone’ as follows:
The radio display blinks the current call tone setting. You can select the desired call tone
value (0,1,2 or 3) by pressing the 
and 
buttons. Each time you select a different value, your radio sounds the selected call tone (except for value ‘0’).
Once you have selected the desired call tone, long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving.
Note: The values available for Call Tones settings are dependent on the values programmed
via the CPS. Call Tones is disabled when the value is set to ‘0’.
PROGRAMMING MICROPHONE GAIN LEVEL
To configure the Microphone Gain Level, enter the Advanced Configuration Mode and scroll up or down through the programming modes by short pressing the PTT button or 
(Menu) button until you reach the ‘Microphone Gain Level Programming Mode’.
The radio display shows the Microphone Gain Level as follows:
The radio display blinks the current Microphone Gain Level setting. You can select the desired Microphone Gain Level (1 = low gain, 2 =
PROGRAMMING FEATURES
41English