| the CPS. Scramble is disabled when the | ||
FEATURES | |||
value is set to ‘0’. |
| ||
channels for the radio. Once you have entered | |||
| PROGRAMMING MAXIMUM NUMBER OF | ||
| CHANNELS |
| |
| You can configure the maximum number of | ||
PROGRAMMING | the Advanced Configuration Mode, scroll up or | ||
down through the programming modes by short | |||
| |||
| pressing the PTT button or | (Menu) button | |
| until you reach the ‘Maximum Channel | ||
| Programming Mode’. |
| |
| The radio display shows the Maximum Number | ||
| of Channels as follows: |
| |
| MAX CH |
| |
|
| ||
The radio display blinks the current maximum number of channels programmed. Use the 
and 
buttons until you get the desired
English 40
maximum number of channels. Long press the PTT button to exit and save, or short press the PTT button to move to the next programming feature without saving.
Note: The values available for maximum channel settings are dependent on the maximum number of channels the radio supports.
PROGRAMMING CALL TONES
Call Tones feature allows you to transmit an audible tone to other radios on the same channel to alert them that you are about to talk or to alert them without speaking.
In ‘Call Tone Selection Mode’ you can configure the type of call tone for the radio. The settings available are dependent on the maximum number of call tones your radio supports.
To program Call Tones, enter the Advanced Configuration Mode and scroll up or down through the programming modes until your display radio shows the ‘Programming Call