Motorola RMU2080D manual Nuisance Channel Delete, Customer Programming Software CPS

	Nuisance Channel Delete
FEATURES
	Nuisance Channel Delete allows you to
	temporarily remove channels from the Scan
	List. This feature is useful when irrelevant
	conversations on a ‘nuisance’ channel ties up
	the radio’s scanning feature.
PROGRAMMING	To delete a channel from the Scan List:
	• Start Scan mode by short pressing the SB2(*)
	button.
	• Wait until the radio stops at the channel you wish
	to eliminate. Long press the SB2 button to delete
	it. You cannot delete the channel with scan
	enabled (home channel).
	• The channel will not be scanned again until you
	exit the Scan mode by short pressing the SB2
	button again or by turning OFF the radio and
	back ON.
	Note: (*) This assumes the SB2 button is not
	programmed for a different mode.

English 46

CUSTOMER PROGRAMMING SOFTWARE (CPS)

Radio to be programmed

USB Ports

CPS Programming Cable

Drop-In Tray Charger Tray

Figure 1: Setting up the radio to the CPS

The easiest way to program or change features in your radio is by using the Customer Programming Software (CPS) and the CPS Programming Cable(*). CPS Software is available for free as web based downloadable software at:

www.motorolasolutions.com/RMseries