Motorola RMU2080D manual Display Scan, Multiple, Scan List, Scan, Auto, Scramble, Time-Out, Timer

	Programmable Via		Programmable via
	Advanced
				CPS
Features	Configuration					Default Value	Programming Tips
	Display	Non-	Display		Non-
		Display			Display
Scan	Yes	Yes	N/A		N/A	SB2 Button	Short press SB2 to enable/disable scan.
							Use CPS for editing Scan List (adding/removing
Multiple (16)						ON - All	channels to be scanned). For display models only:
	Yes	No	Yes		Yes		you can add/delete channels in the scan list using
Scan List						Channels
							front panel by going into Advanced Configuration
							Mode(1).
Scan, Auto							Feature available only for Non Display Models. For
	No	Yes	Yes		Yes	OFF	front programming using front panel radio enter
Scan
							Advanced Configuration Mode(1)
							Display models: you can program scramble using
						OFF	front panel by going into Advanced Configuration
Scramble (4)	Yes	No	Yes		Yes		Mode(1).
						(level 0)
							Non display models: program either SB1 or SB2
							button
							Use CPS to program to program how long the PTT
Time-Out							can be pressed before the transmission is
	No	No	Yes		Yes	60 seconds	automatically terminated. Values are 60, 120 and
Timer
							180 seconds. (Pressing again PTT will start the
							transmission again).

86