Motorola RMU2080D manual Time-Out Timer, Power Select, Call Tones, Scramble

To program, connect the RM Series radio via the Drop-in Charger Tray and CPS Programming Cable as shown in Figure 1 on page 46. Toggle the cable switch of the CPS Programming Cable to ‘CPS Mode’.

CPS allows you to program frequencies, PL/ DPL Codes as well as other features such as: Bandwidth Select, Time-out Timer, Power Select, Scan List, Call Tones, Scramble, Reverse Burst, etc. CPS is a very useful tool as it can also lock the Front-Panel Radio Programming or restrict any specific radio feature to be changed (to avoid accidentally erasing the preset radio values). It also provides security by giving the option to set up a password for profile radio’s management. For more information, refer to Features Summary Chart Section at the end of the User Guide.

Note: (*) CPS Programming Cable P/N# HKKN4027_ is an accessory sold separately. Please contact your Motorola point of purchase for more information.

Time-Out Timer

Transmissions can be terminated when the PTT button is pressed by setting up a Time-Out Timer.

Power Select

Power Select allows you to select between high and low transmission power per frequency in each channel. The power levels for RM Series 2W toggle between 1W and 2W.

Note: Some frequencies may have FCC transmit power restrictions that disallow them to be set at a higher power level. For more information, refer to the “Frequency and Code Charts” on page 62

Call Tones

See “Programming Call Tones” on page 40.

Scramble

See “Programming Scramble” on page 39.

PROGRAMMING FEATURES

47English