Adding the handset to your telephone base
Adding and registering a handset
To register a handset to your telephone base:
1.Make sure the handset is out of the telephone base or charger and alternately
shows 1.Press HS LOC on base 4 sec and 2.Then press # on handset before you begin the registration.
2.Press and hold 
HANDSET LOCATOR on the telephone base for about four seconds
(until the IN USE light on the telephone base is on) and then release the button.
3. Press # (pound key) on the handset. The screen shows Registering...Please wait. It takes up to one minute to complete the registration. HANDSET registered and then HANDSET X appears on
the screen, with X being the handset number
If the registration is not successful, the handset screen shows Registration failed. Please start again from step 1 above.
1.Press HS LOC on base 4 sec
2.Then press #
on handset
Registering...
Please wait
NOTE: You cannot register a handset if any other
system handset is in use.HANDSET registered
10