AT&T 9351 user manual Remote Access Commands

9351_book_2ATT 1/1/01 3:33 PM Page 18

ANSWERING SYSTEM OPERATION

AT TOUCH TONE PHONE

Remote Access Commands

Function:	Command:
Play messages in	Press #, then the appropriate mailbox
a mailbox	number (1, 2, or 3). The system plays
	new messages. If there are no new
	messages, the system plays old messages.
Repeat a message	Press #4while message is playing;
	each press backs up another message.
Skip a message	Press #6while message is playing;
	each press advances another message.
Stop	Press #5.
Save messages	Hang up.
Delete message	Press #9while message is playing.
Review announcement	Press #7; system plays announcement,
	then beeps.
Record announcement	Press *7; after beep, record
	announcement, press #5to stop.
	System plays back announcement.
Record memo	Press *8; then mailbox number where
	you want memo recorded; speak after
	beep; press #5to exit.
End remote access call	Press *0.
Turn system off	Press #0; the system announces,
	“The machine is off.” Press #0again
	to turn the system back on.
Turn system on	When system is off, it answers after 10
	rings and announces, “Please enter your
	security code.” Press #, then enter your
	remote access code.

NOTE: The remote access call will automatically end if 20 seconds go by with no key being pressed (other than when recording or playing messages or announcements).

18