AT&T 9351 user manual Installation, Before You Install, Install the handset battery

Page 4

9351_book_2ATT 1/1/01 3:33 PM Page 2

INSTALLATION

Before You Install

1Choose a location for the base near an electrical outlet and a telephone jack.

This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch.

2Install the handset battery.

a)Remove battery

compartment cover by pressing on the indentation

and sliding downward.

b)Plug battery pack connector into handset.

c)Place battery pack in compartment with the wires in the lower left corner, along the bottom of the battery pack.

d)Replace cover by sliding it up into place.

2

Image 4

Contents Revised Part 1 Important Product InformationAdvanced American Telephones. All rights reserved Contents Before You Install InstallationInstall the handset battery Attach the belt clip to the cordless handset optional Table/Desk Installation Charge the handset batterySet the dial mode Check for dial toneConnect the telephone line cord Connect the power cord Wall InstallationPosition the wall mount adapter on the base Follow Steps 3-5 in Table/Desk Installation Mount the base on the wallTelephone Operation Page/Handset Locator Handset Ringer Style Temporary Tone DialingRinger Off Headset Jack Operating RangeTelephone Memory Audible Indicators Answering System OperationAbout Mailboxes About AnnouncementsRecord Your Announcement Press Uuntil you hear Set Outgoing MessageAnswering System Feature Setup Feature SummaryAdjust Playback Volume Listen To, Save & Delete MessagesDelete Messages Play MessagesRecord a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Voice MenuRemote Access Commands Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack Spare Battery Charger Spare battery compartmentCase of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels If messages are incompleteIf CL appears in the Message Window If you have difficulty hearing messagesIf your outgoing announcement isn’t clear