AT&T 9002 user manual If the phone does not ring when you receive a call

Page 21

IN CASE OF DIFFICULTY

If the phone does not ring when you receive a call:

•Make sure the handset ringer is on.

•Make sure the telephone line cord(s) is connected firmly to the base and the modular telephone jack(s).

•Make sure the AC adapter is plugged firmly into an outlet not controlled by a wall switch.

•You might be too far from the base; move closer.

•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

•Press cto change to another channel.

If you hear other calls while using your phone:

•Press cto change to another channel.

•Disconnect the base from the modular jack and plug in a corded telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone service company.

19

9002_book.1AT&T

19

8/12/98, 4:09 PM

Image 21

Contents Part Philips Consumer Communications L.P. All rights reserved Contents 9002book.1AT&T 12/98, 409 PM Installation Table/Desk InstallationSet the dial mode Connect the telephone line cords to the base Connect the power cordCharge the handset batteries for 16 hours Check for dial toneConnect the line cords Wall InstallationFollow Steps 7 and 8 under Table/Desk Installation Belt ClipMount the telephone on the wall jack Operation Operation Answering a Call Making a CallEnding a Call RedialBase Ringer Volume Handset Ringer VolumeSpeakerphone Volume Temporary ToneHold Special Telephone ServicesMute IntercomSwitching a Conference Call to the Base Conference CallsFour-Way Conference Calls Headset Jack Operating Range Telephone Memory Charging the Handset Battery Pack Replacing the Handset Battery PackBatteries Batteries If you hear noise or interference when using the phone Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If the phone does not ring when you receive a call