OPERATION
Checking Handset Ringer Selection
1Press p, *.
2Press 1for Line 1 or 2for Line 2.
3Press *. You will hear the current ringer style selection.
4Press oto exit.
NOTE: If you’re on a call on one line and a call comes in on the other line, you will hear an “alert” tone on your call.
Handset Ringer Volume
Adjust the handset ringer volume to high (H) or low (L) using the switch on the side of the handset.
Base Ringer Volume
Line 1 and Line 2 ringers on the base have been assigned different ringing styles. You can adjust the volume of the base ringers to HIGH, LOW or OFF using the switches on the side of the base.
Speakerphone Volume
Use + and - on the base to adjust the volume of the speakerphone.
Temporary Tone
NOTE: If you have touch tone service, you do not need to use the Temporary Tone feature.
If you have dial pulse (rotary) service, this feature allows you to enter codes or tones needed to operate answering machines, or use electronic banking services, calling cards, and other special services. This feature will operate most special services; however, some services may actually require a touch tone line. To be sure, ask the company that provides the special service.
1Dial the call, then press *. Any buttons pressed after this send tone signals.
2After you hang up, the phone automatically returns to dial pulse (rotary) dialing.
10
9002_book.1AT&T | 10 | 8/12/98, 4:09 PM |