AT&T SB67108 user manual Notify alert

Page 27

Getting started

Mailbox setup

1.When the handset is idle, press MENU/ENTER.

2.Press DIR or CID to scroll to Mailbox setup.

3.Press MENU/ENTER twice to select Set access code.

4.Use the dial pad to enter a four-digit number. Press OFF/CLEAR to backspace and delete a digit.

Set access code Notify alert

Back

Enter mailbox access code :0001

BackNext

5.Press the Next softkey or MENU/ENTER to save the password and to select Mailbox security.

6.Press DIR or CID to select On or Off.

Mailbox security :Off

7. Press MENU/ENTER to save the setting and return

Back

to the previous menu. There is a confirmation tone. To exit without

making changes, press

OFF/CLEAR.

NOTES:

1.The access code must have four digits.

2.You will hear an error tone and the screen displays Please enter another if you enter an access code that is already assigned.

Notify alert

You can receive notification calls to your cell phone or paging device after each new phone call message has been recorded to the handset mailbox. You can remotely access the message from a touch-tone telephone (see page 65). To receive notification calls, you must save your telephone number on the handset, and then set the system

to call that number after it finishes recording a message. It is best to enter a telephone number that has caller ID service. When you receive a notification call you will only hear silence. The silence will last for about 15 seconds and then the call ends. If no one picks up the call within three rings, the telephone base stops calling it. The system only calls the alert number once. If your paging device is busy, not available or off during the call, you will not receive the notification call.

21

Page 26 Page 28
Image 27
Page 26 Page 28
Contents User’s manual 888 915-2007. In Canada, dial 1 866 Parts checklist Table of contents Directory Index PHONE/FLASH Quick reference guideMain menu Using menusAvoid placing the handset and charger too close to InstallationImportant Information Charger installationCharge completed Handset battery installation and chargingLow battery ChargingStep Low battery indicator Registration & sel Register HS. Then put HS Add and register handsetsAdd and register handsets Deregister all handsets Deregister all handsets Belt clip and optional headset Install belt clip as shown below if desiredHandset setup Menu settingsRinger volume DIR or CID Ringer toneLCD contrast Levels to optimize readability in different lightingKey tone LanguagePress DIR or CID to select English or Espaňol Change handset name Line selectionHold reminder Speed dial Enter, edit or delete a speed dial numberCustomer support Screen icons, indicator tones and lights Indicator tonesLights Mailbox setup Set access code remote access code and mailbox securityFast answer mode. Press MENU/ENTER Notify alert Screen displays Press Phone or Spkr to confirm alert call Set alert number Press MENU/ENTER to select Alert call #Turn alert on or off Call alert confirmationRecord a new personal announcement Announcement setupAnncemnt setup. Press MENU/ENTER Play the current personal announcementMailbox setup Handset basic operation Answering a call To answer a call Press PHONE/FLASH or Spkr Auto off Temporary ringer silencingTo edit a number Last number redialingTo view the ten most recently dialed numbers To redial a numberOptions while on calls To cancel call privacy Recording a callTo record a call To mute a call While recording a callPlay back a recorded call MuteConference and call transfer features Switching between linesHold To access the directory while on a call Join a call in progressChain dialing To drop one line Three-way conference callsTo talk privately with one external party To talk privately with one internal partyTo end a conference call To drop an intercom callCovm on/off Make an intercom call IntercomEnd an intercom call Call transfer using intercomAnswer an incoming call during an intercom call Answer an intercom callCall transfer using intercom PTT to *Base Release PTT key to stop . When Push to talk PTT intercomPTT call to a handset or base Press DIR or CID to choose the desired handset or basePTT to All PTT call to all handsets and basePress and hold PTT on the side of your handset until Your handset screen shows PTT to AllCall to a handset or base or PTT call to all handsets Convert PTT call to intercom callEnd PTT call About the directory CapacityExit the directory Create and store a directory entry Create directory entriesStore a pause in a directory number Store a flash in a directory number Review directory Review directory entries When the handset is idleSearch by name Search directoryDelete all entries Dial, delete or edit entriesDisplay dial Delete an entryInformation about caller ID with call waiting About caller ID call logCaller ID history How caller ID history call log worksHandset screen display Caller ID history Missed new calls indicator Caller ID operationMemory match Make a call log entry ready to dial Review caller ID historyDelete all caller ID entries Dial a call log entrySave a call log entry to the directory On-screen message Reason Reasons for missing caller ID informationAnswering system and voicemail Handset voicemail box answering systemRecord announcement Setting your system to automatically answer callsGeneral mailbox Auto attendantNew message indication Voice promptsListen to new messages in the general mailbox Message playbackListen to new messages in the handset mailbox Play all old messages in the handset mailboxDelete all old messages in the handset mailbox When messages are playing on the handsetOptions during playback Delete all old messagesPress DIR or CID to scroll to Delete all old. Press Recording and delivering memos Record and deliver a memo in a handset mailboxRecord and deliver a memo in the general mailbox Remote access To remotely access the answering systemRemote commands Press to transfer the current message during Handset display screen messages REC Taking care of your telephone MaintenanceSafety information Important safety informationEspecially about cordless telephones Pacemaker patients FCC part 68 and Acta Industry Canada FCC part Limited warranty Limited warranty Limited warranty Dect 6.0 digital technology Technical specificationsInstallation and charging in this user’s TroubleshootingTroubleshooting Troubleshooting Please refer to Handset battery installation Troubleshooting Troubleshooting Troubleshooting Troubleshooting When using a speakerphone, controlling Troubleshooting Troubleshooting Troubleshooting Review entries IndexIndex Index Action Remote command Remote access wallet card

SB67108 specifications

The AT&T SB67108 is a cordless telephone system designed specifically for business use, offering a rich set of features tailored for professional environments. This device epitomizes reliability and advanced communication technology, making it a solid choice for small enterprises, offices, and home-based businesses.

One of the key features of the SB67108 is its DECT 6.0 technology, which ensures superior sound quality and extended range. DECT (Digital Enhanced Cordless Telecommunications) minimizes interference and provides a more secure connection, making conversations clearer and more reliable. This technology enables a strong linkage between the base unit and the handsets, allowing users to have uninterrupted calls even when they are away from the main office space.

The SB67108 comes equipped with a base station that can support up to four handsets, providing flexibility for offices of various sizes. It is particularly beneficial for businesses with multiple employees who need to communicate effectively and efficiently. Each handset is lightweight and ergonomically designed, ensuring comfort during extended usage.

Another important aspect of the AT&T SB67108 is its user-friendly interface. The large backlit display on the handsets makes it easy to navigate through the various features, including phonebook entries, call logs, and settings. The device allows for 50 name and number entries, making it easy to store important contacts for quick dialing.

In terms of functionality, the SB67108 offers a range of calling features, including caller ID, call waiting, and conference calling, enabling multiple parties to connect seamlessly. Additionally, it provides a speakerphone option, allowing for hands-free communication—a particularly useful feature for multitasking in busy office environments.

The AT&T SB67108 also prioritizes energy efficiency. It includes a power-saving mode that reduces power consumption when the phone is not in active use. Furthermore, it operates with rechargeable batteries that provide extended talk and standby time, ensuring that users are rarely left without the ability to communicate.

In summary, the AT&T SB67108 is a multifunctional cordless phone system that combines advanced DECT 6.0 technology with a range of features designed for business needs. Its robust performance, user-friendly design, and energy-efficient operation make it a valuable asset for any professional setting, enhancing productivity and communication for users everywhere.
Top Page Image Contents