AT&T SB67108 user manual Important safety information, Safety information

Page 76

Appendix

Important safety information

This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.

Safety information

•Read and understand all instructions in the user’s manual. Observe all markings on the product.

•Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.

•Do not use a telephone in the vicinity of a gas leak. If you suspect a gas leak, report it immediately, but use a telephone away from the area where the gas is leaking. If this product is a cordless model, make sure the telephone base is also away from the area.

•Do not use this product near water, or when you are wet. For example, do not use it in a wet basement or shower, or next to a swimming pool, bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays for cleaning. If the product comes in contact with any liquid, unplug any line or power cord immediately. Do not plug the product back in until it has dried thoroughly.

•Install this product in a protected location where no one can trip over any line or power cords. Protect cords from damage or abrasion.

•If this product does not operate normally, see the Troubleshooting section on pages 80-91 of this user’s manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 76-78. Do not open this product except as directed in your user’s manual. Opening the product or reassembling it incorrectly may expose you to hazardous voltages or other risks.

•Replace batteries only as described in your user’s manual (see page 7). Do not burn or puncture batteries — they contain caustic chemicals.

•This power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet.

Caution: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or

call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268.

70

Page 75 Page 77
Image 76
Page 75 Page 77
Contents User’s manual 888 915-2007. In Canada, dial 1 866 Parts checklist Table of contents Directory Index Quick reference guide PHONE/FLASHUsing menus Main menuInstallation Avoid placing the handset and charger too close toCharger installation Important InformationHandset battery installation and charging Low batteryCharging Charge completedStep Low battery indicator Add and register handsets Registration & sel Register HS. Then put HSAdd and register handsets Deregister all handsets Deregister all handsets Install belt clip as shown below if desired Belt clip and optional headsetMenu settings Handset setupRinger volume Ringer tone LCD contrastLevels to optimize readability in different lighting DIR or CIDLanguage Key tonePress DIR or CID to select English or Espaňol Line selection Change handset nameHold reminder Enter, edit or delete a speed dial number Speed dialCustomer support Indicator tones Screen icons, indicator tones and lightsLights Set access code remote access code and mailbox security Mailbox setupFast answer mode. Press MENU/ENTER Notify alert Set alert number Press MENU/ENTER to select Alert call # Turn alert on or offCall alert confirmation Screen displays Press Phone or Spkr to confirm alert callAnnouncement setup Anncemnt setup. Press MENU/ENTERPlay the current personal announcement Record a new personal announcementMailbox setup Handset basic operation Answering a call To answer a call Press PHONE/FLASH or Spkr Temporary ringer silencing Auto offLast number redialing To view the ten most recently dialed numbersTo redial a number To edit a numberOptions while on calls Recording a call To cancel call privacyTo record a call While recording a call Play back a recorded callMute To mute a callSwitching between lines Conference and call transfer featuresHold Join a call in progress To access the directory while on a callChain dialing Three-way conference calls To talk privately with one external partyTo talk privately with one internal party To drop one lineTo drop an intercom call To end a conference callCovm on/off Intercom Make an intercom callCall transfer using intercom Answer an incoming call during an intercom callAnswer an intercom call End an intercom callCall transfer using intercom Push to talk PTT intercom PTT call to a handset or basePress DIR or CID to choose the desired handset or base PTT to *Base Release PTT key to stop . WhenPTT call to all handsets and base Press and hold PTT on the side of your handset untilYour handset screen shows PTT to All PTT to AllConvert PTT call to intercom call Call to a handset or base or PTT call to all handsetsEnd PTT call Capacity About the directoryExit the directory Create directory entries Create and store a directory entryStore a pause in a directory number Store a flash in a directory number Review directory entries When the handset is idle Review directorySearch directory Search by nameDial, delete or edit entries Display dialDelete an entry Delete all entriesAbout caller ID call log Information about caller ID with call waitingHow caller ID history call log works Caller ID historyHandset screen display Caller ID history Caller ID operation Missed new calls indicatorMemory match Review caller ID history Make a call log entry ready to dialDial a call log entry Delete all caller ID entriesSave a call log entry to the directory Reasons for missing caller ID information On-screen message ReasonHandset voicemail box answering system Answering system and voicemailSetting your system to automatically answer calls General mailboxAuto attendant Record announcementVoice prompts New message indicationMessage playback Listen to new messages in the handset mailboxPlay all old messages in the handset mailbox Listen to new messages in the general mailboxWhen messages are playing on the handset Options during playbackDelete all old messages Delete all old messages in the handset mailboxPress DIR or CID to scroll to Delete all old. Press Record and deliver a memo in a handset mailbox Recording and delivering memosRecord and deliver a memo in the general mailbox To remotely access the answering system Remote accessRemote commands Press to transfer the current message during Handset display screen messages REC Maintenance Taking care of your telephoneImportant safety information Safety informationEspecially about cordless telephones Pacemaker patients FCC part 68 and Acta Industry Canada FCC part Limited warranty Limited warranty Limited warranty Technical specifications Dect 6.0 digital technologyTroubleshooting Installation and charging in this user’sTroubleshooting Troubleshooting Please refer to Handset battery installation Troubleshooting Troubleshooting Troubleshooting Troubleshooting When using a speakerphone, controlling Troubleshooting Troubleshooting Troubleshooting Index Review entriesIndex Index Remote access wallet card Action Remote command

SB67108 specifications

The AT&T SB67108 is a cordless telephone system designed specifically for business use, offering a rich set of features tailored for professional environments. This device epitomizes reliability and advanced communication technology, making it a solid choice for small enterprises, offices, and home-based businesses.

One of the key features of the SB67108 is its DECT 6.0 technology, which ensures superior sound quality and extended range. DECT (Digital Enhanced Cordless Telecommunications) minimizes interference and provides a more secure connection, making conversations clearer and more reliable. This technology enables a strong linkage between the base unit and the handsets, allowing users to have uninterrupted calls even when they are away from the main office space.

The SB67108 comes equipped with a base station that can support up to four handsets, providing flexibility for offices of various sizes. It is particularly beneficial for businesses with multiple employees who need to communicate effectively and efficiently. Each handset is lightweight and ergonomically designed, ensuring comfort during extended usage.

Another important aspect of the AT&T SB67108 is its user-friendly interface. The large backlit display on the handsets makes it easy to navigate through the various features, including phonebook entries, call logs, and settings. The device allows for 50 name and number entries, making it easy to store important contacts for quick dialing.

In terms of functionality, the SB67108 offers a range of calling features, including caller ID, call waiting, and conference calling, enabling multiple parties to connect seamlessly. Additionally, it provides a speakerphone option, allowing for hands-free communication—a particularly useful feature for multitasking in busy office environments.

The AT&T SB67108 also prioritizes energy efficiency. It includes a power-saving mode that reduces power consumption when the phone is not in active use. Furthermore, it operates with rechargeable batteries that provide extended talk and standby time, ensuring that users are rarely left without the ability to communicate.

In summary, the AT&T SB67108 is a multifunctional cordless phone system that combines advanced DECT 6.0 technology with a range of features designed for business needs. Its robust performance, user-friendly design, and energy-efficient operation make it a valuable asset for any professional setting, enhancing productivity and communication for users everywhere.
Top Page Image Contents